V28A36H200BS

Current - Output (Max):	5.56A
Size / Dimension:	4.60" L x 2.20" W x 0.50" H (116.8mm x 55.9mm x 12.7mm)
Package / Case:	Full Brick
Mounting Type:	Through Hole
Efficiency:	82.6%
Operating Temperature:	-40°C ~ 100°C
Features:	OVP, UVLO
Applications:	ITE (Commercial)
Voltage - Isolation:	3kV
Power (Watts):	200W
Series:	Maxi
Voltage - Output 3:	--
Voltage - Output 2:	--
Voltage - Output 1:	36V
Voltage - Input (Max):	36V
Voltage - Input (Min):	9V
Number of Outputs:	1
Type:	Isolated Module
Part Status:	Active
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

        

Introduction

    A DC-DC converter is an electronic circuit which is used to convert a regulated or unregulated direct current (DC) electric supply to another DC voltage level. V28A36H200BS is a type of DC-DC converter, designed to provide precise, low ripple, low noise output.     

Applications

    V28A36H200BS is a cost-effective and reliable converter suitable for a wide range of applications, perfect for use in harsh industrial and avionics environments. It has a wide input range and can be used for a variety of tasks such as, but not limited to, industrial control, avionics, automotive, medical equipment, railway systems, power systems, amplifier circuits, and communications systems.     

Working Principle

    V28A36H200BS is a highly efficient DC-DC converter that works by regulating the output voltage based on the input voltage using an integrated circuit (IC). It employs pulse width modulation (PWM) to transform an input voltage to a much lower or higher output voltage. Basically, the PWM uses a switch, usually an insulated-gate bipolar transistor (IGBT), to chop up the incoming current, thus adjusting the output voltage. The power coming from the input is converted to a very high frequency, typically around 100kHz, and the output is then filtered to the appropriate level.     The V28A36H200BS utilizes a synchronous rectifier, which is a semiconductor switching device that improves efficiency by reducing the voltage drop and eliminating reversed current flow. The synchronous rectifier also reduces the power losses, which means it can operate at higher temperatures. Additionally, the V28A36H200BS can be configured to operate in either a Buck (step-down) or Boost (step-up) mode to meet the specific requirements of the application.     The V28A36H200BS also offers a wide range of protection features, including over-voltage protection, reverse-polarity protection, over-temperature protection, and short-circuit protection. These features are designed to ensure safe and reliable operation of the device in a wide range of applications.     

Conclusion

    The V28A36H200BS is a robust and reliable DC-DC converter that is suitable for a variety of applications. It offers high efficiency and is designed to provide precise, low ripple, and low noise output. Additionally, it has a wide input range and is equipped with a range of protection features for safe and reliable operation.  

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description