V28B15C150BL

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

DC-DC converters are devices which provide regulated direct current (DC) power from a source of varying direct current. V28B15C150BL is one such converter, providing a regulated 15V output from an input voltage between 4V and 28V DC. It is a step-down converter, designed to reduce the input voltage level to accommodate a lower level, regulated output. V28B15C150BL application field and working principle is discussed in detail below.

Applications

V28B15C150BL is primarily intended for use in powering small low voltage devices, such as cameras, displays, and other light-duty electronics items. This converter is capable of delivering up to 1.5A of continuous output current at a typical efficiency of 95%. It is equipped with an over-temperature and short-circuit protection, which activates upon sensing any irregularities on its output. Depending on the application, the device can also be configured to run in either forced-pulse width modulation (PWM) or fixed frequency PWM operation. The fact that the device is capable of delivering power in the form of a constant current, as opposed to a constant voltage makes it ideal for powering devices that require an accurate current level while in operation.

Working Principle

At the heart of the V28B15C150BL is a buck-boost circuit, made up of an inductor, a pair of transistors, and an internal control circuit. When the input voltage is greater than the output voltage, the input is stepped down, while when the input is less than the output, it is stepped up. The input voltage is rectified first before it is regulated by the buck-boost circuit. The buck-boost circuit works by increasing or decreasing the internal switching frequency of the transistors, based on the input and output voltages. This enables the transistors to efficiently modulate the input voltage into the desired output voltage.

The control circuit maintains the output voltage level by continuously measuring the voltage across the output and adjusting the current through the inductor accordingly. This ensures that the output voltage is held at a steady level despite fluctuations in the input voltage. The design of the buck-boost circuit also helps the converter keep its power dissipation low, as it can efficiently modulate the input voltage without dissipating too much energy as heat.

The V28B15C150BL is an ideal solution for powering small low-voltage devices. It can deliver a constant, regulated output voltage at relatively high efficiency and with only minimal power dissipation. Its ability to efficiently modulate the input voltage into the desired output voltage makes it a reliable and economical choice for powering devices that require an accurate current level while in operation.

The specific data is subject to PDF, and the above content is for reference