V28C15C100BG

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The V28C15C100BG is a device belonging to the DC to DC converter category. It is a DC to DC converter that steps down an input voltage of up to 28V and delivers a regulated output voltage at 15V and up to 100 mA of output current. The device is highly efficient and features an input protection circuit with low standby power. It is widely used in a variety of industrial, automotive, communication, and consumer applications.

The V28C15C100BG is a step-down DC/DC converter that uses high-frequency synchronous rectification to achieve high efficiency and fast transient response. The input voltage is fed into the primary side of an isolation transformer and then rectified by the integratedFull-wave bridge rectifier, which charges the output cap. When VIN is greater than VOUT, this DC/DC converter operates in transition mode and PWM ramp is generated within the device. The PWM signal will be transmitted to Auxiliary winding of the transformer to drive the secondary side MOSFET switches. The Aux winding of the transformer couples the gate driver signals from the primary side to the secondary side to reduce the switching losses.When the PWM signal is at high level, the MOSFET switch at the secondary side is switched on, otherwise it is in the OFF state. This operation is very similar to a Buck converter circuit. The output is then filtered by an LC filter and is delivered to the output terminals of the device at the voltage and current as specified by the user.

The V28C15C100BG employs a variety of design features that optimize the performance of the device. The primary current limit is optimized to eliminate the destabilization due to the transformer\'s core saturation. The output voltage is controlled by a reference voltage which can be adjusted by an external resistor. The device also features soft start, over-current protection, over-temperature weak pull-up and shutdown features for safety. The device operates within an ambient temperature range of -40°C to +125°C.

The V28C15C100BG can be used for a variety of applications which require a regulated DC output from a higher input voltage. Its high efficiency and small size make it an ideal solution for a range of industrial, automotive, communication, and consumer applications. It can be used in automotive electronics like vehicle security systems, entertainment systems and lighting, consumer electronics like portable devices, digital cameras and printers, communication and industrial systems, home appliances, solar and medical equipment. The device\'s high efficiency, fast transient response and small size make it an ideal solution for applications where battery run-time is an important factor.

In conclusion, the V28C15C100BG is a highly efficient DC to DC converter that is designed to provide a regulated output from a higher input voltage. The device is widely used for a variety of industrial, automotive, communication, and consumer applications due to its high efficiency, small size, and fast transient response. It is a versatile solution that can easily be customized for a variety of applications.

The specific data is subject to PDF, and the above content is for reference