V300A15C500BF2

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

DC-DC converters, or DC to DC converter, are utilized to change over the DC voltage starting with one range then onto the next, either up or down. These converters are accessible as either switch mode or steady-state. The V300A15C500BF2 DC-DC converter is a switch mode power supply intended for the modernized capability to change over as long as 800Vdc to a 15Vdc output voltage up to 500W.

The V300A15C500BF2 power supply was intended for high power and noteworthy proficiency working from a scope of 10 – 800Vdc sources. It includes a consistent current controlled PFC stage trailed by a forced switch mode power factor strengthener (PWS). The V300A15C500BF2 has been demonstrated to offer a rate of productivity of up to 91.5%, with up to 500W of power conveyed to an open-frame ventilation assembly.

The V300A15C500BF2 has a wide scope of applications, including direct current force supplies for robots, mechanical assembly, LED lighting, commercial machines, wind turbines, and renewable power sources. It tends to be arranged in any mounting arrangement and works easily with most overwhelming burden conditions. With extremely low EMI, low force factor disturbance, and outstanding proficiency, it is ideal for power supplies that require high unwavering quality from a wide reach of voltage sources.

To use the V300A15C500BF2, two voltages each with a measurement of 50VDC, 75VDC, 100VDC, 150VDC, 200VDC, and 800VDC must be connected to the info pin on the base board of the board. Next, an output voltage of 15VDC or 20VDC with a rating of 500W should be connected to the yield connector on the board. After these connections have been made, the power supply is ready to be used.

The functioning of the V300A15C500BF2 is established based on the principle of switch mode, or High Frequency Voltage Rectification (HFVR). This is a procedure wherein the yield voltage and current from the power supply is changed over from a DC to AC signal with the use of a try switch. This is then changed over back to a DC signal with the utilization of a half-wave recitifier. At long last, the yield voltage and current are balanced and scaled back to a level which is sensible for the load.

The V300A15C500BF2 is a top-notch and proficient power supply that is perfect for a wide range of applications. With its capacity to change over in an organized way in a range of input voltages, it has numerous favorable circumstances over different kinds of power supplies. The V300A15C500BF2 is profoundly dependable and give high power productivity with low electromagnetic interference.

The specific data is subject to PDF, and the above content is for reference