V300A48C400BF2

Current - Output (Max):	8.33A
Base Part Number:	V300A48C400
Size / Dimension:	4.60" L x 2.20" W x 0.54" H (116.8mm x 55.9mm x 13.7mm)
Package / Case:	Full Brick
Mounting Type:	Through Hole
Efficiency:	88.3%
Operating Temperature:	-20°C ~ 100°C
Features:	OVP, UVLO
Applications:	ITE (Commercial)
Voltage - Isolation:	3kV
Power (Watts):	400W
Series:	Maxi
Voltage - Output 3:	--
Voltage - Output 2:	--
Voltage - Output 1:	48V
Voltage - Input (Max):	375V
Voltage - Input (Min):	180V
Number of Outputs:	1
Type:	Isolated Module
Part Status:	Active
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

DC DC Converters

DC-DC converters are electrical devices used to convert a direct current (DC) voltage supply to a different, lower or higher, DC voltage level. They are used in a wide variety of applications, including aerospace and medical systems as well as power supplies for consumer electronic devices. The acronym V300A48C400BF2 is perhaps one of the most common type of DC-DC converters in use today, with its wide range of known applications. Understanding the operation and basic principles of the V300A48C400BF2 can help to gain an appreciation of its capabilities as well as its limitations.A V300A48C400BF2 DC-DC converter is a non-isolated type of DC to DC converter. Non-isolated DC-DC converters operate without the use of a galvanic isolator, allowing for lower cost and a more compact design. It is considered as a step-down type of DC-DC converter, wherein it takes an input voltage which is significantly higher than the desired output voltage, and step it down to the desired level.The V300A48C400BF2 is a linear regulator, which means it has a fixed voltage output that is reduced from the original source voltage by the same amount every time a set amount of current is drawn from the source. This makes it ideal for use in situations where low noise, constant voltage, and fast response times are desired. Its wide range of input and output voltages make it a suitable choice for a wide variety of applications.The V300A48C400BF2 is comprised of three main components; a voltage regulator, an adjustable shunt, and a capacitor. The voltage regulator is responsible for reducing the input DC voltage to the desired output voltage. This is done by controlling an analog signal that is returned to the circuit from the adjustable shunt. The adjustable shunt monitors the output voltage, and when it reaches the desired level, a signal is sent to the voltage regulator, causing it to terminate the voltage reduction process. The capacitor is used to store energy that is necessary for the V300A48C400BF2 to operate properly. This helps to ensure that the output voltage is not affected by any changes in the input DC voltage, which can often occur when the same DC source is used to power multiple devices.The V300A48C400BF2 has a wide range of applications, from powering sensitive electronics, such as medical implants, to powering large motors. It is used in industrial automation systems where precision in motor speed and voltage is required. Meanwhile, in the automotive industry, it is often used to power engine control units as well as other on-board electronics. In addition, the V300A48C400BF2 is widely used in the aeronautical industry, powering electronics in aircrafts and helicopters.Overall, the V300A48C400BF2 is a versatile and reliable DC to DC converter with a wide range of applications. Its design makes it a cost-effective and reliable option for applications involving the conversion of DC voltages. Owing to its low noise features and fast response times, it is also ideal for sensitive mechanical or medical systems which require accuracy and reliability for their operations.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description