V300A48C500BN

Current - Output (Max):	10.4A
Size / Dimension:	4.60" L x 2.20" W x 0.54" H (116.8mm x 55.9mm x 13.7mm)
Package / Case:	Full Brick
Mounting Type:	Through Hole
Efficiency:	89%
Operating Temperature:	-20°C ~ 100°C
Features:	OVP, UVLO
Applications:	ITE (Commercial)
Voltage - Isolation:	3kV
Power (Watts):	500W
Series:	Maxi
Voltage - Output 3:	--
Voltage - Output 2:	--
Voltage - Output 1:	48V
Voltage - Input (Max):	375V
Voltage - Input (Min):	180V
Number of Outputs:	1
Type:	Isolated Module
Part Status:	Active
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

><p> DC-DC converters are used to convert one DC voltage level into another. The V300A48C500BN is a DC-DC converter designed to provide an adjustable output voltage from 48V to 500V with a maximum output current of 3A. It is a high-efficiency, high-power device designed for a variety of applications.</p><p>The V300A48C500BN can be used to provide an adjustable power supply for industrial, automation, medical, and other electronic devices. It can also be used as a DC-to-DC transformer to convert a low voltage to a higher voltage, or a higher voltage to a lower voltage. The V300A48C500BN is also ideal for use in applications such as power line conditioning, solar irrigation, condensation, and galvanic decoupling.</p><p>The V300A48C500BN has a wide input voltage range of 4.5-60V and can be used with any input voltage in the specified range. The output voltage can be adjusted from 48V to 500V with a maximum output current of 3A. The V300A48C500BN also includes a built-in EMI filter for improved noise immunity and transient suppressor for improved surge protection.</p><p>The V300A48C500BN operates using a switch-mode conversion methodology. The switch-mode converter works by controlling a switching element that switches the input voltage on and off. This in turn regulates the output voltage. The switching actions are controlled by a Pulse Width Modulation (PWM) control circuit that is powered from a low voltage source, such as 5V or 3.3V. The PWM signal is generated using an external oscillator, such as a Crystal Oscillator, which can be adjusted to tune the frequency. The PWM signal is applied to the switching element which is comprised of a MOSFET and a diode.</p><p>At start-up, the V300A48C500BN pulls the drain of the MOSFET to ground. This creates a short-circuit current that quickly ramps up the output voltage to within the specified range. As the output voltage approaches the set voltage, the PWM signal is modulated in order to keep the output voltage at the desired level. When the output voltage reaches the desired level, the V300A48C500BN will remain in steady-state operation.</p><p>The V300A48C500BN is designed for high power and high-efficiency applications. It features a low quiescent current drain, low heat dissipation, low output voltage ripple, and a wide range of protection features such as over-voltage, under-voltage, and short-circuit protection. It also features an adjustable soft-start and a built-in over-temperature protection circuit.</p><p>The V300A48C500BN is a robust and reliable DC-DC converter. It provides adjustable output voltage from 48V to 500V with a maximum output current of 3A. It is designed for a wide range of high power applications and features high-efficiency conversion, wide input voltage range, and protection features. The V300A48C500BN is an ideal solution for applications such as power line conditioning, solar irrigation, condensation, and galvanic decoupling.</p>

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description