V300B2H100B3

Current - Output (Max):	50A
Base Part Number:	V300B2H100
Size / Dimension:	2.28" L x 2.20" W x 0.50" H (57.9mm x 55.9mm x 12.7mm)
Package / Case:	9-DIP Module
Mounting Type:	Through Hole
Efficiency:	74%
Operating Temperature:	-40°C ~ 100°C
Features:	OVP, UVLO
Applications:	ITE (Commercial)
Voltage - Isolation:	3kV
Power (Watts):	100W
Series:	MINI
Voltage - Output 3:	--
Voltage - Output 2:	--
Voltage - Output 1:	2V
Voltage - Input (Max):	375V
Voltage - Input (Min):	180V
Number of Outputs:	1
Type:	Isolated Module
Part Status:	Active
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

DC DC converters are often used in electronics engineering for providing power to digital circuits or other electronic devices. The V300B2H100B3 is a type of DC-DC converter device mainly used in the field where low voltage and high current is required. It is capable of providing high conversion efficiency, robustness and reliability, as well as low noise and cost.The V300B2H100B3 is a 300W, single output, isolated bidirectional DC-DC converter. It is designed to provide a voltage input of up to 200V, with an output of up to 10V. The device features soft-start, over-voltage protection and over-current protection (OCP), as well as current limiting. It also has a wide temperature range and a high power factor.The V300B2H100B3 DC-DC converter is typically used to convert 12V to 19V and 24V to 48V, as well as from 24V to 36V. It is used in applications such as solar energy systems, medical systems, industrial and automotive electronics and equipment.The working principle behind the V300B2H100B3 can be explained by the following explanation: two input signals, DC and alternating current (AC), are connected to two input terminals of the converter. These are then switched in a controlled voltage/current scheme to the output phase of the converter. The input signal is applied to the two input terminals of the converter, with one being connected to the DC power input and the other to the AC input. This signal is converted to a square wave voltage form before being passed to the `transformer and synchronous rectifier` to achieve the required voltage/current transformation. The transformer then outputs an alternating voltage which is fed to the `synchronous rectifier`, where it is then converted to a constant DC voltage or current depending on the required output. The output voltage or current is then regulated by the `oscillator` of the converter. The frequency of the oscillator is determined by the voltage or current set-point of the output. The oscillator can then be used to control the `PWM (pulse width modulation)` or `PFM (pulse frequency modulation)` techniques to further regulate the output voltage or current of the V300B2H100B3 DC-DC converter device. The output of the V300B2H100B3 can also be regulated by the adjustable `soft-start` circuitry, which further helps to increase the overall efficiency of the device. In conclusion, the V300B2H100B3 is a 300W, single output, isolated bidirectional DC-DC converter that is mainly used in applications where low voltage and high current is required. It provides very high conversion efficiency, robustness and reliability. The working principle of the V300B2H100B3 consists of two input signals (DC and AC) being connected to two input terminals of the converter and then being regulated with the use of the transformer and synchronous rectifier. The output voltage or current of the V300B2H100B3 is further regulated by the oscillator, PWM or PFM methods, and the adjustable soft-start circuitry. Therefore, the V300B2H100B3 can be used in a variety of applications such as solar energy systems, medical systems, industrial and automotive electronics and equipment.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description