V300B5C150BS

Current - Output (Max):	30A
Size / Dimension:	2.28" L x 2.20" W x 0.50" H (57.9mm x 55.9mm x 12.7mm)
Package / Case:	9-DIP Module
Mounting Type:	Through Hole
Efficiency:	83%
Operating Temperature:	-20°C ~ 100°C
Features:	OVP, UVLO
Applications:	ITE (Commercial)
Voltage - Isolation:	3kV
Power (Watts):	150W
Series:	MINI
Voltage - Output 3:	--
Voltage - Output 2:	--
Voltage - Output 1:	5V
Voltage - Input (Max):	375V
Voltage - Input (Min):	180V
Number of Outputs:	1
Type:	Isolated Module
Part Status:	Active
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

DC-DC Converters are electrical devices designed to convert a source of direct current (DC) power from one voltage level to another. The V300B5C150BS is a DC-DC converter designed specifically for mission critical applications. It is a three phase, two wire system with five isolated output circuits. This powerful DC-DC converter can provide up to 3,000 W of power, with a peak current of 100A and input voltage of 180-400 volts DC. The V300B5C150BS converter is designed to provide power to critical mission load circuits, such as satellite imaging equipment, radar, missile launch controls, and communication equipment.The V300B5C150BS uses a combination of power conversion techniques to boost the input voltage from the power source to the desired level in the output circuit. The converter is based on a full-bridge forward converter topology, which utilizes an inductor to store energy. The inductor is connected to a diode bridge, which acts as a rectifier to convert the AC input into DC. The DC input is then switched at high speed (up to 30kHz) using two half-bride switches. This switching process is what enables the conversion of DC input voltage into a higher output voltage.The primary control method for the V300B5C150BS is a phase-shifted current mode control (PSCMC) loop. This technique relies on sensing the input current and output voltage, and then using a microcontroller to adjust the switching frequency and duty cycle in order to maintain a desired output voltage. This type of control allows for a much more efficient and accurate regulation of the output voltage.The V300B5C150BS also features redundant input and output circuits as well as isolation for safety. These features help to ensure that the converter will continue to operate even if one of the circuits fails. Additionally, the V300B5C150BS is equipped with an automatic turn-off feature that is activated in the event of an over-voltage or under-voltage condition in the output circuit.In mission critical applications, the V300B5C150BS provides an efficient solution for powering the equipment. The converter is designed to handle a wide range of input voltages, and offers an accurate and reliable control of the output voltage. The built-in safety features make it a reliable choice when powering mission critical equipment.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description