V300C36H75BL3

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The V300C36H75BL3 is a DC-DC converter, a type of electrical circuit that converts between two different direct current (DC) voltages. This popular type of converter is used to provide reliable, efficient, and cost-effective power conversion for a wide range of applications. While there are various types of DC-DC converter available, the V300C36H75BL3 and other “buck” converters are among the most popular, due to their low cost, high efficiency, and compact size.

Application Field

The V300C36H75BL3 is primarily used for voltage conversion applications, where the input voltage is a higher DC voltage than the output voltage. It is a buck-type converter, meaning that it works by reducing the voltage supplied from the input to the output. Buck converters are often used in low-voltage devices such as cell phone chargers, laptop adapters, and USB chargers, as well as in a variety of industrial applications. In linear applications, DC-DC converters are used to maintain a steady voltage, as in motor speed controllers and medical imaging equipment. DC-DC converters are also used to generate a specific voltage required by specific electronic components, such as certain microprocessors.

Working Principle

A DC-DC converter works by controlling the flow of electrical current from one voltage to another. The converter works by switching the input voltage on and off at a high frequency in order to regulate the output voltage. The V300C36H75BL3 uses an integrated circuit (IC) in order to control the switching process, and has two power switches (MOSFETs) which it uses to control the output voltage. The IC measures the output voltage and switches the MOSFETs on and off in order to maintain the desired output voltage. The switching rate of the power switches is also dependent on the inductor and the capacitor, which are also contained within the V300C36H75BL3.

The IC measures the level of the input voltage and compares it to the output voltage in order to determine the correct switching rate of the power switches. When the input power increases, the IC increases the switching frequency, effectively increasing the output voltage. Conversely, when the input power decreases, the IC will reduce the switching frequency, thereby reducing the output voltage. This process is known as “pulse width modulation,” or PWM, and is the most common type of power regulation employed in buck converters.

The V300C36H75BL3 also features a “reset” pin which can be used to reset the IC and the power switches. When the reset signal is triggered, the MOSFETs switch off, and the IC will resume operation in the same state as before the reset. This gives the V300C36H75BL3 a level of protection against over-current and over-voltage conditions.

Conclusion

The V300C36H75BL3 is a buck-type DC-DC converter that is used to reduce input voltages to lower output voltages. It is often used in consumer electronic products such as cell phone chargers, laptop adapters, and USB chargers, as well as in linear applications such as motor speed controllers and medical imaging equipment. The V300C36H75BL3 works by controlling the flow of electrical current via pulse width modulation, and features a “reset” pin for safety. With its high efficiency, low cost, and small size, the V300C36H75BL3 is ideal for a variety of voltage conversion applications.

The specific data is subject to PDF, and the above content is for reference