V300LC40CP

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Varistors, MOVs, and other related products are now commonly used to provide over-voltage protection of electronic circuits. The V300LC40CP is a varistor made by Murata and it is used for a number of applications, where it provides protection against transient electrical over-voltage occurrences. The Murata V300LC40CP is a thermistor-discharge type varistor with a large capacity that ranges from 11.5A to 150A. It has been designed for applications such as air gap discharge lighting fixtures, and other motor control equipment.

The V300LC40CP is a varistor or voltage-dependent resistor that works by increasing its electrical resistance when it is subjected to high-voltage transients. The varistor is made of an alloy of different metal oxides such as zinc oxide and manganese oxide. This alloy is called a “Varistor Ceramic” and it is actually a ceramic material with high electrical resistivity which provides this device with the ability to protect against excessive voltage.

The V300LC40CP has a working voltage range of 75 to 500 V, and a rated current of 30mA. Its sensitivity is measured in terms of a specific temperature range, from -55°C to 85°C. This means that the device can provide protection against high voltage transients only within this temperature range. The device has a discharge time of 10ms, meaning that it will absorb the excess voltage and redirect it to ground within 10ms.

In terms of performance, the V300LC40CP can provide up to 95% reduction of the inrush current at power-on, as well as a reliable over-voltage and under-voltage protection. It can also protect from both surge and spike transients. Its mechanical construction includes a plastic-based case that is highly heat-resistant, making this device suitable for use in a wide range of temperature and humidity conditions.

The V300LC40CP is commonly used in power supplies to ensure surge and spike protection for the power circuit. It can also be used in motor controls, air gap discharge lighting fixtures, and other applications where it is necessary to protect against transient voltage spikes. This device is also used in power conditioning systems to provide protection against power system surges, and to provide over-voltage and over-current protection for circuits.

The Murata V300LC40CP is a reliable varistor that provides effective over-voltage and transient protection for circuits. Its working temperature range, response time, and discharge current make it suitable for a variety of applications, from power conditioning systems to air gap discharge lighting fixtures. This device is highly stable and reliable, and offers excellent performance at a reasonable price. It is also very easy to use and install, making it a great choice for any application.

The specific data is subject to PDF, and the above content is for reference