V375A15H400BS3

Current - Output (Max):	26.67A
Base Part Number:	V375A15H400
Size / Dimension:	4.60" L x 2.20" W x 0.54" H (116.8mm x 55.9mm x 13.7mm)
Package / Case:	Full Brick
Mounting Type:	Through Hole
Efficiency:	85.3%
Operating Temperature:	-40°C ~ 100°C
Features:	OVP, UVLO
Applications:	ITE (Commercial)
Voltage - Isolation:	3kV
Power (Watts):	400W
Series:	Maxi
Voltage - Output 3:	--
Voltage - Output 2:	--
Voltage - Output 1:	15V
Voltage - Input (Max):	425V
Voltage - Input (Min):	250V
Number of Outputs:	1
Type:	Isolated Module
Part Status:	Active
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

DC DC converters are power converters which convert an input DC voltage to a different DC voltage level. They are widely used in many applications and are used to power a variety of electrical devices. The V375A15H400BS3 is a DC DC converter made by Mitsubishi Electric that converts an input DC voltage of 375 V to an output of 15 V with a power rating of 400 watts.The V375A15H400BS3 is a significantly efficient DC DC converter with conversion efficiency greater than 90%. It is highly reliable and has a low noise level, which makes it suitable for use in various applications. The converter can be used in applications such as telecommunication, medical equipment, electric vehicle powertrains, and renewable energy sources.The working principle of the V375A15H400BS3 is based on DC-DC conversion technology. It works by using high frequency switching to convert the input DC voltage to a different level and output for the device being powered. The V375A15H400BS3 uses a high-side and low-side switching technique, whereby a transistor is used to convert the high DC voltage into a low DC voltage. This low voltage is then output to the device being powered.Several control methods are utilized to ensure high accuracy and stability of the output voltage. Control methods such as pulse width modulation (PWM) are used to ensure that the output voltage remains consistent and within its operational range. Feedback loops are also used to monitor the output signals and adjust accordingly.The V375A15H400BS3 is equipped with a range of protection functions, such as thermal protection, over voltage protection, and short circuit protection. This ensures that the converter does not become damaged or cause damage if the operating conditions become too extreme. Additionally, remote control of the converter is possible through the use of an RS232 serial port.To summarize, the V375A15H400BS3 is a DC DC converter from Mitsubishi Electric that is used to convert an input DC voltage of 375 V to an output of 15 V, with a power rating of 400 watts. It is highly efficient, with conversion efficiency greater than 90%, and is suitable for use in a range of applications. The working principle of the converter is based on DC-DC conversion technology and utilizes a high-side and low-side switching technique. It is also equipped with several protection functions and can be remotely controlled.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description