Current - Output (Max):	14.29A
Base Part Number:	V375A28E400
Size / Dimension:	4.60" L x 2.20" W x 0.54" H (116.8mm x 55.9mm x 13.7mm)
Package / Case:	Full Brick
Mounting Type:	Through Hole
Efficiency:	88%
Operating Temperature:	-10°C ~ 100°C
Features:	OVP, UVLO
Applications:	ITE (Commercial)
Voltage - Isolation:	3kV
Power (Watts):	400W
Series:	Maxi
Voltage - Output 3:	--
Voltage - Output 2:	--
Voltage - Output 1:	28V
Voltage - Input (Max):	425V
Voltage - Input (Min):	250V
Number of Outputs:	1
Type:	Isolated Module
Part Status:	Active
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

DC DC Converters

The V375A28E400BS is a DC-to-DC converter that is designed to take a raw direct current source such as a photovoltaic panel, solar cell, or battery and convert it into a usable form of electrical power.This type of converter is designed to transfer power from one DC source to another, often with a different voltage. It can also be used to regulate voltage between two or more different power sources in order to maintain a specific output voltage for a particular application. This is often done using buck-boost or switching circuits.The V375A28E400BS has the ability to convert a DC voltage from 14 to 50V DC into a basic output voltage (5V, 12V, 24V and 48V) that can be used by applications such as gate drivers, LED lighting, and PC controllers. It is equipped with a suite of protection features including overvoltage protection, overcurrent protection, and a temperature limit set-point. It is highly efficient, with a maximum conversion rate of up to 96%.The conversion process of the V375A28E400BS is based on the principle of a simple buck circuit with direct current switching. This type of Topology (Digital Control) regulates the output voltage so that is stays close to the set point value by varying the duty cycle of the switching cycle.Digital Control also allows the V375A28E400BS to address various parameters such as Setup, current limit and soft start. All of these parameters can be programmed beforehand and then adjusted during installation by the user.The V375A28E400BS is designed for a wide range of applications where a low power solution is needed. It is optimized for DIN Rail mounted applications, making it ideal for building automation, industrial control and process control applications.In Conclusion, the V375A28E400BS is a DC-to-DC converter designed to transfer power from one DC source to another with a different voltage and regulate voltage between two or more different power sources. It is highly efficient, and equipped with a suite of protection features including overvoltage protection, overcurrent protection, and a temperature limit set-point. It is ideal for DIN Rail mounted applications making it ideal for building automation, industrial control and process control applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description