V375A2T160BS3

Current - Output (Max):	80A
Base Part Number:	V375A2T160
Size / Dimension:	4.60" L x 2.20" W x 0.54" H (116.8mm x 55.9mm x 13.7mm)
Package / Case:	Full Brick
Mounting Type:	Through Hole
Efficiency:	73.7%
Operating Temperature:	-40°C ~ 100°C
Features:	OVP, UVLO
Applications:	ITE (Commercial)
Voltage - Isolation:	3kV
Power (Watts):	160W
Series:	Maxi
Voltage - Output 3:	--
Voltage - Output 2:	--
Voltage - Output 1:	2V
Voltage - Input (Max):	425V
Voltage - Input (Min):	250V
Number of Outputs:	1
Type:	Isolated Module
Part Status:	Active
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

DC DC Converters: V375A2T160BS3 application field and working principle

DC-DC converters are widely used in many applications such as power supplies, battery chargers, and other related products. They are normally made of a power semiconductor, such as MOSFET, which acts as a bridge between a high voltage or low voltage source and a load. The V375A2T160BS3 is a three-phase DC-DC converter designed to step-down voltages from 500 to 800V to a desired output value that is adjustable from 20V to 375V. The device has a very low output voltage ripple (< 10mV) and high efficiency up to 98%. The device has a built-in over-temperature protection feature and over-voltage protection that help ensure its safe operations. This makes it ideal for applications that require safety as well as energy efficiency. It can be used in a wide variety of applications such as solar energy, electronic power conditioning, home appliances, and automotive technology.The working principle of the V375A2T160BS3 converter is based on the buck topology, which uses a high-frequency MOSFET switch to regulate the output voltage. The high-frequency switch is modulated by a control signal to switch the converter on and off in regular intervals. The average output voltage is regulated by varying the duty cycle of the control signal. The V375A2T160BS3 converter is protected from a short circuit in the load by a voltage external sense loop. The current sensing device detects any fault current flow and commands the converter to shut down. The converter is further protected from reverse current flow using a MOS diode. The converter will transition into a continuous conduction mode whenever the output voltage drops below the minimum set point, allowing the device to resume normal operation when the load is switched off. The V375A2T160BS3 converter can be used with a wide range of control methods, including voltage regulation, voltage feedback control, current feedback control, and a constant frequency control. The device also has a built-in digital phase-shift control which enables the converter to operate at optimum efficiency at all load levels. The converter also has an internal oscillator that generates a precision, fixed frequency waveform. The V375A2T160BS3 provides a low EMI signature, thus making it suitable for applications in the medical industry and other areas where electromagnetic interference needs to be minimized.In conclusion, the V375A2T160BS3 three-phase DC-DC converter is an ideal solution for applications requiring a robust, highly efficient, and low-noise power supply. It offers robust current and temperature protection, adjustable output voltage, and a precise voltage/current control and low-noise operation. This makes the device suitable for a wide range of applications in both industrial and consumer sectors.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description