V375A3V3M200BS3

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

DC DC convertors are a widely used piece of technology in our world today. From the electronics in a car to the battery packs powering modern day phones, DC DC convertors are relied upon to take the power from one voltage level to another. The V375A3V3M200BS3 convertor is a particularly versatile and powerful DC DC convertor used in many different industries and applications. This article seeks to explain the type of applications the V375A3V3M200BS3 is suitable for and its working principle.

The V375A3V3M200BS3 convertor is a three-phase input, single-output intermediate bus convertor (IBC). It is typically employed in applications where there is a requirement for a low line voltage to convert a higher line voltage to a lower voltage. Examples of such applications include solar power plants, motor drives, battery storage and other high-power industrial applications. This convertor is able to deliver a maximum continuous output power of 375A at 3.3VDC with a 250Vdc bus voltage.

The working principle of the V375A3V3M200BS3 convertor is based on a three phase synchronous rectifier topology. The three phase inputs are rectified and then smoothed using low-pass filters. The rectified outputs are then fed to the intermediate voltage bus which is adjusted by the controller via pulse width modulation (PWM), synchronized with the input voltage waveform. The power is then delivered to the load, regulated to the desired output voltage, using the V375A3V3M200BS3 control algorithm.

The V375A3V3M200BS3 contains a number of features that make it suitable for use in a number of different applications. It has an adjustable controller, which allows for the output voltage to be adjusted to meet the needs of the application. It also has a low output impedance and a low-frequency PWM switching frequency, which ensures that the device has high efficiency, with minimal power loss.

The V375A3V3M200BS3 is designed to operate safely and effectively in a wide variety of conditions. It is temperature compensated, meaning that it can still function within its rated output voltage range even when the ambient temperature changes. It is also short-circuit and over-voltage protected, ensuring that the device does not experience any permanent damage in the event of an overload or short-circuit condition.

In conclusion, the V375A3V3M200BS3 convertor is an incredibly versatile and safe device capable of delivering up to 3.3VDC at 375A, while remaining temperature compensated, and effectively managing short-circuit and over-voltage protection. The V375A3V3M200BS3 is employed in a variety of high-power industrial applications, such as solar power plants, motor drives and battery storage systems, making it a valuable addition to any industrial infrastructure.

The specific data is subject to PDF, and the above content is for reference