V375C2E50BL3

Current - Output (Max):	25A
Base Part Number:	V375C2E50
Size / Dimension:	2.28" L x 1.45" W x 0.65" H (57.9mm x 36.8mm x 16.5mm)
Package / Case:	Quarter Brick
Mounting Type:	Through Hole
Efficiency:	73.9%
Operating Temperature:	-10°C ~ 100°C
Features:	OVP, UVLO
Applications:	ITE (Commercial)
Voltage - Isolation:	3kV
Power (Watts):	50W
Series:	MICRO
Voltage - Output 3:	--
Voltage - Output 2:	--
Voltage - Output 1:	2V
Voltage - Input (Max):	425V
Voltage - Input (Min):	250V
Number of Outputs:	1
Type:	Isolated Module
Part Status:	Active
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

DC DC Converters

DC-DC converters are used to convert a dc voltage source from one voltage level to another, by using either linear or switching circuits. In linear converters a discrete power transistor acts as a voltage regulator, while in switching converters, power transistors are used to switch load current on and off.The V375C2E50BL3 is a DC-DC converter with a wide range of applications. This converter is capable of supplying 50A of current from a voltage range of 4.5 – 30V. It is housed in an 80 x 135 x 28.6mm frame and offers a variety of features, such as an input filter and reverse current protection. The converter also provides a good balance of efficiency and low output ripple noise.The working principle for the V375C2E50BL3 is based on a synchronous buck topology. This converter is driven by a fixed frequency (50kHz), high efficiency, low-side MOSFET switch and an available soft start option. The converter features both synchronous and diode rectification modes with fixed frequency operation, to reduce energy loss and allow for higher efficiency. The V375C2E50BL3 output is controlled by an external resistor divider and programmed in either voltage or current mode. The output voltage is also set very accurately (±1%) using an internal compensation loop. The converter also features an over-voltage and over-current protection, which helps keep the converter and the application connected to it, safe from damage in the event of abnormal conditions.The V375C2E50BL3 is designed for a multitude of applications, ranging from power supply for sensors, to driving current in power modules in computing and embedded systems. This makes it suitable for a wide range of applications, such as industrial, medical, automotive, telecom, consumer electronics, and instrumentation.DC-DC converters are used to convert a dc voltage source from one voltage level to another, and the V375C2E50BL3 is an example of a reliable and efficient DC-DC converter with a broad range of applications. Its features make it suitable for many applications, from power supply for sensors to driving current in power modules in computing systems, and its accuracy and robustness make it a reliable and safe option for a wide variety of applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description