V375C5C100B2

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

DC-DC converters are used to convert from one voltage to another or from an AC voltage to a DC voltage. The V375C5C100B2 DC-DC converter is an on-board, high-efficiency, wide-input DC-DC voltage converter designed for military and industrial applications. It can provide up to 375W of power with an input range of 6V to 36V and output of 5V/100A. The unit is housed in a sealed metal case, and includes all necessary components including input and output filters, protection circuits, and SMD capacitors.

The principle of operation of the V375C5C100B2 is based on the Buck-Boost Converter topology, which is a switched-mode power supply (SMPS) that uses a high frequency semiconductor switch, usually a MOSFET, to convert input voltage into constant output voltage or current. In this DC-DC converter, the input voltage is received at the filter section, then rectified and fed to the switching circuit. The switching circuit includes the MOSFET, two feedback optocouplers, two current-sense resistors, and two feedback comparators. The MOSFET is controlled by a pulse-width modulator, which is controlled by the feedback comparator. The feedback comparator allows the output voltage to remain constant regardless of the input voltage.

The power MOSFET is configured in a half-bridge configuration and driven by a high frequency PWM oscillator. The Buck-Boost topology operates as a central processing unit (CPU) to continuously adjust the duty cycle of the PWM signal generated by the oscillator to keep the output voltage constant. The timing of the switches is achieved through a network of capacitors and inductors connected between the input voltage and the output voltage. The output voltage is regulated by the comparator circuitry, which compares the output voltage to a reference level. If the output voltage exceeds the reference level, the pulse-width modulator reduces the duty cycle until the output voltage is again regulated.

Another feature of this DC-DC converter is the inclusion of input and output filters to improve the quality of the output voltage. The input filter consists of two filter capacitors and two inductors, which filter out up to 85% of the ripples produced by the switching action of the MOSFET and output filter. The output filter consists of two capacitors, which filter out the remaining 15% of the ripples. This filter also reduces the voltage level of the output voltage.

The unit also includes short circuit protection, overvoltage protection, and reverse polarity protection. These features prevent the converter from being damaged due to overloads, spikes, or short circuits. The V375C5C100B2 is well suited for a wide range of applications, including automotive, audio, and industrial applications, due to its high power capacity, wide input voltage range, and protection features.

The specific data is subject to PDF, and the above content is for reference