V48C28H75B2

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

DC-DC converters are a type of power conversion devices which take in a DC voltage from a source, and output another DC voltage which is either higher or lower in magnitude than the input. This application can be applied in a wide range of applications, including but not limited to renewable energy, automotive and electrical power systems. The technology behind DC-DC converters is impressive, as it is capable of both rectifying and generating DC in one technology, and is usually more efficient than using a separate DC-AC inverter technology. This technology is often used in the form of a module, where the components of the converter are integrated together into a single unit.The V48C28H75B2 DC-DC converter is a module based off of a full bridge topology, and is mainly used for high power, high voltage applications in the range of 250 to 1000 Volts. It is able to switch rapidly, while operating with peak efficiency of over 97%. This is achieved with its advanced current sharing technology, which prevents it from operating at maximum power. It also features built-in over-voltage, short-circuit, and thermal protection.The working principle of a full-bridge-based DC-DC converter is based on the same principle as other DC-DC converters, where the input voltage is rectified to a high voltage. The input is then switched multiple times, with a positive and negative half-cycle, before being converted into the desired output voltage. The switching is done with the MOSFET switch, and its control is done with a logic circuit and a gate driver. The switching of the input voltage also creates a pulse-width modulation, which is used to efficiently adjust the output voltage amplitude. The high frequency that the input voltage is switched at results in the output voltage having a low ripple, meaning that it is largely stable and suitable for sensitive electronics.When the MOSFET switch is switched rapidly, there is a lot of power loss, as the FET switches have a high resistance. Therefore, resistive losses can be minimized by using higher quality components, and if possible, adding in a cooling fan to increase the device\'s thermal characteristics.The V48C28H75B2 DC-DC converter is highly efficient, due to its current sharing technology, which prevents the module from reaching peak power. The module also features built-in over-voltage, short-circuit, and thermal protection, allowing it to be used safely in various applications. These features make the V48C28H75B2 DC-DC converter applicable for a wide range of applications, including solar and renewable energy systems, and automotive channel converters.In conclusion, the V48C28H75B2 DC-DC converter is a powerful and efficient module with various features, making it applicable for a wide range of applications. It operates on the basis of full-bridge topology, using a MOSFET as a switch and a logic circuit and gate driver for control. The advanced current sharing technology results in high efficiency, and the built-in over-voltage, short-circuit, and thermal protection make it safe and sensible for various applications. It is therefore a great tool for those looking to generate a controlled and efficient voltage for use in various applications.

The specific data is subject to PDF, and the above content is for reference