V48C8C150BN2

Current - Output (Max):	18.75A
Base Part Number:	V48C8C150
Size / Dimension:	2.28" L x 1.45" W x 0.62" H (57.9mm x 36.8mm x 15.7mm)
Package / Case:	Quarter Brick
Mounting Type:	Through Hole
Efficiency:	87.3%
Operating Temperature:	-20°C ~ 100°C
Features:	OVP, UVLO
Applications:	ITE (Commercial)
Voltage - Isolation:	3kV
Power (Watts):	150W
Series:	MICRO
Voltage - Output 3:	--
Voltage - Output 2:	--
Voltage - Output 1:	8V
Voltage - Input (Max):	75V
Voltage - Input (Min):	36V
Number of Outputs:	1
Type:	Isolated Module
Part Status:	Active
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

DC DC Converters are devices used to regulate the voltage level from a 0 - 10 VDC source to 0 - 5 volts. The V48C8C150BN2 is one such device. It not only regulates the voltage, but also limits the current in order to protect sensitive loads from overloading or damaging themselves.

Application Field

The V48C8C150BN2 is typically used with circuitry such as pulse-width modulation (PWM) drivers, inductive and non-inductive loads, and many DC-powered motors and actuators. It is also used in applications that require a consistent voltage level, such as in powering LED lights or microcontrollers.Due to its small form factor, the V48C8C150BN2 is ideal for use in embedded systems. Its ability to seamlessly integrate into existing systems makes it a great choice for applications such as unmanned aerial vehicles (UAVs) and robotics.

Working Principle

The V48C8C150BN2 utilizes a multi-stage regulator to convert input voltages up to a maximum of 40 volts to a regulated output voltage ranging from 0.8 to 5 volts.The V48C8C150BN2 consists of a transformer, rectifier, filter, regulator, and current limiter. The transformer converts the input voltage into an AC signal. This signal is then rectified, and the resulting DC voltage is then filtered to remove any high- frequency noise.The regulated stage of the V48C8C150BN2 then takes this filtered DC voltage and conditions it through a feedback loop to output a regulated voltage which is then sent to the current limiter. The current limiter then ensures that the load on the output will not be higher than the V48C8C150BN2 can safely handle.

Conclusion

The V48C8C150BN2 is an excellent choice when a regulated source of voltage is needed in embedded systems. Its ability to convert inputs up to 40v and output voltages from 0.8 to 5 volts with current limiting make it suitable for a wide range of applications. From powering LED lights to controlling motors, the V48C8C150BN2 is a great solution for those looking to add the efficiency of a regulated voltage source to their system.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description