V5.5MLA0805NT

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

TVS - Varistors, MOVs are components used to provide protection against electrical overstress and electrical transients generated by either an electrical surge or from an electrostatic discharge in an electronic system. A V5.5MLA0805NT is a specific type of varistor that is particularly used for protection against transient voltages.

A V5.5MLA0805NT is a bidirectional varistor designed to protect electrical components from electrical spikes and surges in a circuit. Typically, it is used in applications where transient protection against overvoltage is necessary. It can be used in industrial and automotive applications, as well as in consumer electronics.

The device is made of a ceramic body with a metal oxide connection. Its characteristics include high peak power capability and a 5.5V maximum voltage. Its maximum clamping voltage is 125V AC or 175V DC at 8A, with a power dissipation of up to 0.6W. The device has a low physical profile of 0.8mm, is bidirectional, and can withstand temperatures ranging from –40°C to +125°C.

The working principle of the V5.5MLA0805NT is based on the fact that it acts as a voltage regulator, when a voltage higher than its rated voltage (5.5 V) is applied. When this occurs, the device will conduct allowing the current to flow until the voltage reaches a safe level. This is achieved by the device having an internal impedance, which is inversely proportional to the applied voltage. This internal impedance reduces the current level which is then safely passed through to provide protection.

The device also has a release time, which is the time it needs for the varistor to reset and be ready to provide protection again. This time can vary depending on the current intensity and temperature conditions. A V5.5MLA0805NT will typically have a release time of 50 µs, and is not affected by temperature or humidity changes.

In conclusion, a V5.5MLA0805NT is a specific type of varistor designed to protect against transient voltage spikes and surges. It is typically used in industrial and automotive applications, as well as in consumer electronics. It is made of a ceramic body with a metal oxide connection, and has a peak power capability and maximum voltage of 5.5V. Its internal impedance reduces the current level which is then safely passed through to provide protection. The device also has a release time of 50 µs which is not affected by temperature or humidity changes.

The specific data is subject to PDF, and the above content is for reference