V72A12E400B3

Current - Output (Max):	33.33A
Base Part Number:	V72A12E400
Size / Dimension:	4.60" L x 2.20" W x 0.54" H (116.8mm x 55.9mm x 13.7mm)
Package / Case:	Full Brick
Mounting Type:	Through Hole
Efficiency:	86.4%
Operating Temperature:	-10°C ~ 100°C
Features:	OVP, UVLO
Applications:	ITE (Commercial)
Voltage - Isolation:	3kV
Power (Watts):	400W
Series:	Maxi
Voltage - Output 3:	--
Voltage - Output 2:	--
Voltage - Output 1:	12V
Voltage - Input (Max):	110V
Voltage - Input (Min):	43V
Number of Outputs:	1
Type:	Isolated Module
Part Status:	Active
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

DC DC Converters

DC DC converters are devices that convert direct current from one voltage level to another. The V72A12E400B3 is an example of such a converter, with a wide range of applications and a few operating principles.

Application Field

The V72A12E400B3 converter is most commonly used in power supply systems, either for reducing/increasing the voltage, or for providing a steady output voltage and current under varying input conditions. It is used in cars, telecommunications, IT networks, space systems, and defense/aerospace industries, due to its high efficiency and high power levels. This converter also includes current limiting and reverse polarity protection, making it a solid choice for critical applications.

Working Principle

The V72A12E400B3 operates in two basic stages: the first stage is the DC-DC conversion, where the incoming DC voltage is stepped up or down. This stage requires very little regulation, and all the current and voltage regulation occurs in the second stage through efficient rectification and linear voltage regulation systems.The DC converter can operate in either a buck mode, a boost mode, or a buck-boost mode, depending on the application requirements. In the buck mode, the input voltage is reduced, while in the boost mode it is increased. With the buck-boost mode, the input voltage is both increased and decreased, allowing for more flexibility and higher efficiency. The converter will also automatically detect the output load, and adjust its own parameters accordingly. The output of the converter is regulated by a linear voltage regulation system. This system uses a series of reference voltages to compare the output voltage of the DC converter against an externally supplied reference voltage. The reference signal is then provided as an input to an operational amplifier, which regulates the output by applying a negative voltage feedback loop. The V72A12E400B3 also includes a variety of safety features, including temperature sensors, current limiters, and overvoltage/undervoltage detection. These features ensure that the converter cannot become dangerously overheated, or exceed rated voltage inputs or outputs.

Conclusion

The V72A12E400B3 is a powerful, efficient, and reliable DC-DC converter with a wide range of applications. Its buck, boost, and buck-boost modes of operation allow it to meet the voltage and current requirements of many critical applications, while its safety features ensure a long lifespan. By combining efficient DC-DC conversion with reliable linear voltage regulation, the V72A12E400B3 is an excellent choice for designers of power supply systems.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description