V72A24E400BF3

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

DC DC Converters

Today’s modern technology has advanced to the point of precision with various applications that demand reliable power sources. The DC to DC converter has become an integral part of countless industrial and electronic appliances as a device to convert direct current (DC) from one level to another. These converters are reliable and accurate with power ratings ranging from low wattage to kilowatts.

DC to DC converters come in two main types, namely isolated and non-isolated, with the latter type also known as seamless or linear converters. In an isolated type, features such as galvanic isolation between input and output are present, and with non-isolated type, the input voltage and output voltage tend to be much lower than in the case of isolated converters. This is because the cost of components that produce galvanic isolation is getting higher due to lack of supply.

In linear converters, the output voltage is basically dependent on the range of the input voltage, and also on the current waveform sent to the converter input. Most linear converters also provide an intermediate voltage between the input voltage and the output voltage. This is because the voltage across a coil is dependent on the voltage at its input.

The V72A24E400 BF3 is a low cost DC to DC converter with an isolation rating of 400 VDC input to output, allowing it to be used for applications such as automotive, medical and industrial, telecom and consumer electronics. The converter has a base frequency of up to 60 kHz with a maximum power consumption of 4 watts for its high efficiency switching frequency. It also includes an internally regulated feedback voltage for a wide output voltage range and over-temperature protection for which the current limit is adjustable. This helps to prevent damage to the converter in cases where the load current is too high.

The V72A24E400 BF3 is driven by a low on-resistance fully-depleted MOSFET external switch which allows the converter to operate at high switching frequencies with low switching losses, making it ideal for low cost commercial and industrial applications. In addition, the converter features on/off control, soft start, and low dropout operation, allowing for reliable startup and graceful shut down.

The V72A24E400 BF3 converter operates by pulse-width modulation (PWM), also known as low frequency voltage regulation. In PWM, short bursts of pulses are applied at a frequency much higher than the current waveform that is sent through the converter input. The pulses are typically up to 500 Hertz, while the current waveform is at a low frequency of around 30 to 50 hertz. The end result is that the current waveform is regulated to a certain level, maintaining a constant voltage or current, depending on the device.

The V72A24E400 BF3 DC to DC converter is a great solution for applications that require a reliable source of power, such as commercial and industrial systems, automotive, medical, and telecom. With its 400 VDC isolation and extensive features, the V72A24E400 BF3 is an ideal choice for a variety of applications.

The specific data is subject to PDF, and the above content is for reference