V72A48E400BF3

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

DC-DC converters, also known as switched-mode power supplies, convert direct current (DC) from one voltage level to another. V72A48E400BF3 is a type of DC-DC converter and it is designed to convert a 48V DC input to a regulated 5V, 8V, 12V, or 15V DC output. V72A48E400BF3 is suitable for applications where additional efficiency, small size, good line and load regulation, electrical isolation and output short circuit protection are required.

Application Field:V72A48E400BF3 DC-DC converter is suitable for medical, communication, industrial, power equipment, telecommunication, measurement, IT and so on. With its wide voltage range 4.5V DC to 48V DC, it can be used to convert an input voltage slightly higher or lower than the voltage range, to allow for regulation to the specified output voltage of 5V, 8V, 12V or 15V.

Working Principle:The V72A48E400BF3 uses a buck regulator topology for its voltage conversion. This topology is based on a power switch whose conducting closed loop is DC current-controlled. The current through the switch is adjusted to maintain the output voltage at the set value. As the input voltage changes, the output remains constant because the constant output is produced by its feedback control loop. At the same time, due to the release of capacitive charge and inductive kickback from the power switches, the control loop will shut down the output for a certain amount of time in order to prevent the output voltage from going beyond a safe level.

The power switch is typically an insulated-gate bipolar transistor (IGBT), a field-effect transistor (FET), or a metal-oxide semiconductor field-effect transistor (MOSFET). The switch is turned on and off by way of a control circuit. This control circuit senses the output voltage and compares it to the reference voltage, and then adjusts the switch on/off duty cycle accordingly in order to maintain the output voltage at the set value.

The V72A48E400BF3 DC-DC converter also uses a transformer for galvanic isolation. Isolation ensures that any fluctuations or disturbances on the input side of the system are kept from the output side, preventing damage to downstream components that could be caused by an unstable input. The transformer also takes advantage of the inductive winding stored energy during the switching from on to off states, thus maintaining energy conversion efficiency.

The V72A48E400BF3 also uses active current limit control and output short circuit protection to ensure safe operation of the system by limiting the current drawn from the input and to protect the output from overloading. The converter also includes several features such as remote On/Off control, temperature protection, overvoltage protection, overcurrent protection, and input reverse polarity protection to ensure the safety of the system.

The V72A48E400BF3 DC-DC converter provides a regulated DC output of 5V, 8V, 12V, or 15V from a wide input voltage range of 4.5V to 48V DC. It has high efficiency, good line and load regulation, and excellent electrical isolation, making it suitable for use in a variety of applications requiring a regulated DC voltage.

The specific data is subject to PDF, and the above content is for reference