V72C15E150BL3

Current - Output (Max):	10A
Base Part Number:	V72C15E150
Size / Dimension:	2.28" L x 1.45" W x 0.62" H (57.9mm x 36.8mm x 15.7mm)
Package / Case:	Quarter Brick
Mounting Type:	Through Hole
Efficiency:	85.9%
Operating Temperature:	-10°C ~ 100°C
Features:	OVP, UVLO
Applications:	ITE (Commercial)
Voltage - Isolation:	3kV
Power (Watts):	150W
Series:	MICRO
Voltage - Output 3:	--
Voltage - Output 2:	--
Voltage - Output 1:	15V
Voltage - Input (Max):	110V
Voltage - Input (Min):	43V
Number of Outputs:	1
Type:	Isolated Module
Part Status:	Active
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

DC DC Converters

DC-DC converters are electronic power converters that enable the direct current (DC) voltage from an electrical source to be increased or decreased to a desired output voltage. They are essential for most power management systems, allowing users to optimize the power output of their applications. The V72C15E150BL3 is a high-performance DC-DC converter developed by Silicon Labs to meet the requirements of high-frequency applications. This article will discuss the application field and working principle of the V72C15E150BL3.

Applications

The V72C15E150BL3 is a voltage-controlled regulator, designed to handle high-frequency applications, as well as a wide variety of low-frequency applications. It is suitable for both isolated and non-isolated power converters, allowing it to be used in applications such as computers, automotive electronics, and industrial equipment.The V72C15E150BL3 is a programmable regulator, and it can be used to reduce energy consumption, improve system reliability, and increase overall efficiency in power management systems. The device features a wide input voltage range, a maximum current rating of 15A, and a power efficiency of 95%. It is also capable of operating at frequencies up to 1MHz.

Features

The V72C15E150BL3 offers several features to improve the performance of power systems. It is designed with an input power range of 8V-14V, with an output range of 0.6V-14V. The device is equipped with current sense pins to enable overcurrent protection, as well as thermal shutdown function and a low quiescent current mode.The V72C15E150BL3 also features an advanced control loop design, which allows for fast transient response and improved power line regulation. The device has a frequency range from 200kHz to 1MHz, allowing for high switching frequencies. It also includes both linear and switching regulation modes, allowing it to optimize efficiency when in linear regulation mode, and reduce output noise when in switching regulation mode.

Working Principle

The V72C15E150BL3 operates using Pulse width Modulation (PWM), a technique used to regulate voltage, current, and power in electronic systems. In this type of system, an IC (Integrated Circuit) monitors a feedback signal from the output to determine the pulse width of a control signal applied to the gate of the device’s power transistors.The duration of the control signal is modulated in response to changes in the output voltage or current, and this allows the device to maintain a constant output voltage with minimal ripple and noise. When the output voltage exceeds the desired value, the control signal is shortened, reducing the amount of current being supplied and preventing the device from over-powering the load.

Conclusion

The V72C15E150BL3 is a high performance DC-DC converter designed to enable a wide variety of applications. Its features include a wide input range, high DC current rating, and programmable control loop, allowing it to provide reliable power output for high-frequency applications. The device operates on a PWM principle, adjusting the pulse width of the control signal to regulate the output voltage and current.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description