V72C28C150BN

Current - Output (Max):	5.36A
Base Part Number:	V72C28C150
Size / Dimension:	2.28" L x 1.45" W x 0.62" H (57.9mm x 36.8mm x 15.7mm)
Package / Case:	Quarter Brick
Mounting Type:	Through Hole
Efficiency:	86.2%
Operating Temperature:	-20°C ~ 100°C
Features:	OVP, UVLO
Applications:	ITE (Commercial)
Voltage - Isolation:	3kV
Power (Watts):	150W
Series:	MICRO
Voltage - Output 3:	--
Voltage - Output 2:	--
Voltage - Output 1:	28V
Voltage - Input (Max):	110V
Voltage - Input (Min):	43V
Number of Outputs:	1
Type:	Isolated Module
Part Status:	Active
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

DC DC Converters play an integral role in many common electronic devices, and there are numerous types available, each with its own benefits and drawbacks. The V72C28C150BN is a typical model of DC DC converter that is suitable for various application fields and uses a tried and tested working principle.This converter is capable of a wide input voltage range, allowing it to operate from a variety of power sources. This versatility makes it a suitable solution for applications requiring low-noise power with highly reliable performance. It offers good stability and consistency but is also relatively power-efficient.The V72C28C150BN adopts a buck-boost topology, which provides the benefits of both buck and boost topologies without the drawbacks of either. It can be tailored to fit specific applications as the addition of an external analogue circuit enables independent control of the output voltage and current.This model operates on a synchronous rectification system, with an internal Buck converter that is capable of converting the input DC to a voltage determined by the feedback circuitry. This voltage is then used to control the current, which is regulated using the switching of the buck converter. This synchronous rectification process enables the device to achieve higher efficiency rates than traditional devices.Transients are avoided with the use of an automatic interruption system, which shuts off the current to protect the device from brief over-voltage and over-current situations. The device also includes protection from short-circuits and reverse polarity, with its overall package size small enough to fit into tight spaces.The output continuous current range of the V72C28C150BN model is up to 150mA, which is sufficient for the majority of DC/DC converter applications, and it provides a maximum output voltage of 28V. This device has been used successfully in a number of applications including automotive, industrial, consumer and power management products.The working principle of the V72C28C150BN can be summed up as follows: input power is connected to the DC DC converter, which converts it to a regulated output voltage and current specified by the device’s feedback circuit. This synchronous rectification process then circulates through the device, providing a power source for the application. The device is protected from transients by an automatic interruption system which is triggered if a brief over-voltage and over-current situation occurs.Overall, the V72C28C150BN DC DC converter is a highly versatile device capable of providing reliable power to a variety of applications. In addition, it has good energy efficiency and incorporates protection circuits to keep it safe from any possible electrical damage. For these reasons, it makes an excellent choice for most DC/DC converter applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description