| Allicdata Part #: | VE-20F-CX-F4-ND |
| Manufacturer Part#: |
VE-20F-CX-F4 |
| Price: | $ 0.00 |
| Product Category: | Power Supplies - Board Mount |
| Manufacturer: | Vicor Corporation |
| Short Description: | DC DC CONVERTER 72V 75W |
| More Detail: | Isolated Module DC DC Converter 1 Output 72V 1.... |
| DataSheet: |  VE-20F-CX-F4 Datasheet/PDF |
| Quantity: | 1000 |
| 1 +: | 0.00000 |
| Current - Output (Max): | 1.04A |
| Size / Dimension: | 4.60" L x 1.86" W x 1.05" H (116.8mm x 47.2mm x 26.7mm) |
| Package / Case: | Full Brick |
| Mounting Type: | Through Hole |
| Efficiency: | 90% |
| Operating Temperature: | -25°C ~ 85°C |
| Features: | OCP, OTP, OVP, SCP |
| Applications: | ITE (Commercial) |
| Voltage - Isolation: | 3kV |
| Power (Watts): | 75W |
| Series: | VE-200™ |
| Voltage - Output 3: | -- |
| Voltage - Output 2: | -- |
| Voltage - Output 1: | 72V |
| Voltage - Input (Max): | 20V |
| Voltage - Input (Min): | 10V |
| Number of Outputs: | 1 |
| Type: | Isolated Module |
| Part Status: | Active |
| Packaging: | Bulk |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
DC-DC converters are power electronics apparatus (components or circuits) that convert a direct current (DC) input voltage to a different direct current output voltage. Generally, single-input, single-output DC-DC converters can be categorized into two types: switched-mode power supplies (SMPSs) and linear regulators. The VE-20F-CX-F4 DC-DC converter belongs to the latter type.
VE-20F-CX-F4 Application Field
The VE-20F-CX-F4 DC-DC converter is an isolated, 5V to 24V DC-DC converter module. This type of converter is most suitable for signal isolation circuit, voltage distillation circuit, and current loop applications. Thanks to its advanced design and waterproof construction, it is also suitable for outdoor applications. Additionally, the wide input voltage range of 2.2V to 28V DC further enhances its versatility.
VE-20F-CX-F4 Working Principle
The VE-20F-CX-F4 DC-DC converter works on the principle of step-down voltage conversion. It employs a buck converter topology to reduce the input voltage to the desired output voltage. By using pulse width modulation (PWM) control, inductor current is regulated with high efficiency, making it highly reliable in providing your circuit with a steady output voltage. The built-in protection circuits for input overvoltage, output overvoltage, overload, and short-circuit make it resistant to faults and further increase its service life.
Moreover, as the device is designed with a shielded and filtered components, its noise interference to surrounding circuits is almost completely eliminated. The board also features solderable ground tabs and solderable output connectors, which allows for flexible system integration.
Conclusion
In conclusion, the VE-20F-CX-F4 DC-DC converter is an ideal choice for a wide range of applications, due to its wide input voltage range, low power waste, effective heat dissipation, and full set of protective features. Its reliable and efficient operation, flexible system integration, and low price further make it the preferred choice for most industrial applications.
The specific data is subject to PDF, and the above content is for reference
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...