VE-20K-MX-B1

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

DC-DC converters are an important class of power supplies designed to produce a regulated output voltage from a dc input voltage. Among the many different designs available, the switch-mode or pulse-width-modulated (PWM) design is the most popular and widely used.The VE-20K-MX-B1 is a high performance DC-DC converter that uses pulse width modulation technology to provide a regulated output voltage from a dc input voltage. It features an adjustable output voltage, a wide input voltage range, low standby current, high efficiency, and a wide operating temperature range.

Function

The VE-20K-MX-B1 works by switching the input dc voltage on and off in such a way that the average output voltage is equal to the desired output voltage. This is achieved by adjusting the duty cycle of the switching. The input is switched on and off at a constant frequency, typically 20kHz. The switching is done using a power MOSFET with the duty cycle determined by a feedback control loop. The feedback loop consists of an error amplifier, a reference voltage, a sensing circuit, and a pulse-width modulation (PWM) controller. The feedback loop continuously monitors the output voltage and compares it to the reference voltage. When the output voltage is below the reference voltage, the duty cycle of the PWM controller increases, which in turn increases the switching frequency. Similarly, when the output voltage is above the reference voltage, the duty cycle of the PWM controller decreases, which in turn decreases the switching frequency.

Advantages

The VE-20K-MX-B1 has many advantages over other rectifier-based DC-DC converter designs, including higher efficiency and lower standby current. Since the input voltage is only switched on and off, the power losses are lower and the efficiency of the converter is higher. The PWM design also allows for more precise control of the output voltage, resulting in greater stability and accuracy. The low standby current means that the converter does not need a large heat sink for cooling, making it suitable for small and portable applications.

Applications

The VE-20K-MX-B1 is suitable for a variety of applications including telecommunications systems, medical equipment, industrial and consumer appliances, automotive, and military and aerospace systems. It can be used to regulate the voltage of a system, or to convert a dc voltage to a different voltage. It can also be used to provide a regulated output voltage from an unregulated ac mains source. Additionally, the VE-20K-MX-B1 can be used to step down a high input voltage to a low output voltage, which can be used to power low voltage devices such as light-emitting diodes (LEDs).

Conclusion

The VE-20K-MX-B1 is a high performance DC-DC converter that uses pulse width modulation technology to provide a regulated output voltage from a dc input voltage. It features an adjustable output voltage, a wide input voltage range, low standby current, high efficiency, and a wide operating temperature range. With all these features, it is suitable for a variety of different applications, making it one of the most popular DC-DC converters available.

The specific data is subject to PDF, and the above content is for reference