| Allicdata Part #: | VE-20L-MY-F4-ND |
| Manufacturer Part#: |
VE-20L-MY-F4 |
| Price: | $ 0.00 |
| Product Category: | Power Supplies - Board Mount |
| Manufacturer: | Vicor Corporation |
| Short Description: | DC DC CONVERTER 28V 50W |
| More Detail: | Isolated Module DC DC Converter 1 Output 28V 1.... |
| DataSheet: |  VE-20L-MY-F4 Datasheet/PDF |
| Quantity: | 1000 |
| 1 +: | 0.00000 |
| Current - Output (Max): | 1.79A |
| Size / Dimension: | 4.60" L x 1.86" W x 1.05" H (116.8mm x 47.2mm x 26.7mm) |
| Package / Case: | Full Brick |
| Mounting Type: | Through Hole |
| Efficiency: | 90% |
| Operating Temperature: | -55°C ~ 85°C |
| Features: | OCP, OTP, OVP, SCP |
| Applications: | ITE (Commercial) |
| Voltage - Isolation: | 3kV |
| Power (Watts): | 50W |
| Series: | VE-200™ |
| Voltage - Output 3: | -- |
| Voltage - Output 2: | -- |
| Voltage - Output 1: | 28V |
| Voltage - Input (Max): | 20V |
| Voltage - Input (Min): | 10V |
| Number of Outputs: | 1 |
| Type: | Isolated Module |
| Part Status: | Active |
| Packaging: | Bulk |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
DC DC converters are used to convert direct current to alternating current or vice versa, and they are among the most widely used power electronics devices. The DC DC Converters can be used for applications such as light dimming, power supplies, motor drives, and audio amplifiers. One of the most widely used DC DC Converter is the VE-20L-MY-F4.
The VE-20L-MY-F4 DC DC Converter is a high-performance, cost-effective, highly reliable solution. It is designed to provide efficient power conversion in applications where wide input voltage range is required. It has a wide input voltage range of 3-7V, and an output voltage range of 0.25-5V. It is also capable of converting power up to 20A at any input voltage range.
The working principle of the VE-20L-MY-F4 DC DC Converter is based on that of the full-bridge isolated voltage regulator. In this circuit, two MOSFETs are used to control the input voltage, while a MOSFET is used to control the output voltage. The input voltage is regulated by two MOSFETs, which act as a voltage-regulator. The output voltage is regulated by the MOSFET, which acts as a switch to control the input voltage. The input voltage is then converted to the output voltage, and the voltage regulation is achieved by varying the voltage on one of the MOSFETs. This enables the circuit to maintain constant output voltage, despite input voltage fluctuations.
The VE-20L-MY-F4 DC DC Converter is ideal for high-power applications. It is designed to provide high efficiency and reliability. It is capable of delivering a wide range of output voltages, while maintaining high stability. It also has a wide range of input voltage, enabling it to be used in different applications. It is ideal for use in power supplies, motor drives, audio amplifiers, and light dimming applications.
In summary, the VE-20L-MY-F4 DC DC Converter is a versatile and reliable power conversion device. It is designed to provide efficient power conversion in applications where wide input voltage range is required. It is capable of providing a wide range of output voltages, while maintaining high stability and efficiency. The device is ideal for use in power supplies, motor drives, audio amplifiers, and light dimming applications.
The specific data is subject to PDF, and the above content is for reference
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...