Allicdata Part #: | VE-20N-IY-S-ND |
Manufacturer Part#: |
VE-20N-IY-S |
Price: | $ 0.00 |
Product Category: | Power Supplies - Board Mount |
Manufacturer: | Vicor Corporation |
Short Description: | DC DC CONVERTER 18.5V 50W |
More Detail: | Isolated Module DC DC Converter 1 Output 18.5V ... |
DataSheet: | VE-20N-IY-S Datasheet/PDF |
Quantity: | 1000 |
1 +: | 0.00000 |
Current - Output (Max): | 2.7A |
Size / Dimension: | 4.60" L x 1.80" W x 0.52" H (116.8mm x 45.7mm x 13.2mm) |
Package / Case: | Full Brick |
Mounting Type: | Through Hole |
Efficiency: | 90% |
Operating Temperature: | -40°C ~ 85°C |
Features: | OCP, OTP, OVP, SCP |
Applications: | ITE (Commercial) |
Voltage - Isolation: | 3kV |
Power (Watts): | 50W |
Series: | VE-200™ |
Voltage - Output 3: | -- |
Voltage - Output 2: | -- |
Voltage - Output 1: | 18.5V |
Voltage - Input (Max): | 20V |
Voltage - Input (Min): | 10V |
Number of Outputs: | 1 |
Type: | Isolated Module |
Part Status: | Active |
Packaging: | Bulk |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
DC DC Converters are a common application field for VE-20N-IY-S, a lightweight, compact, and cost-effective device for DC power supply. The device is a Type I/O Isolated DC/DC converter that provides the conversion of a DC voltage from one level to another. It offers excellent efficiency, high power, and overload current protection while being able to operate with a wide range of input voltage transfers and with input and output ground references.
The device is designed for the conversion of an Unregulated DC Voltage to a regulated DC voltage and provides good efficiency and good transient response. The device is capable of providing transient power delivery up to 20 times the nominal power for a short period. It is also capable of accepting high input voltage and provides high cycle-by-cycle current limit protection.
The working principle of VE-20N-IY-S DC converter is based on the Flyback topology. The main components of the device are a coil, a capacitor, a switch, and two diodes. When the switch is turner on, the electric current flows through the coil and a magnetic field is produced around it. This magnetic field then induces the voltage across the coil, charging the capacitor. After the switch is turned off, the energy stored in the magnetic field is released and put into the output. The diodes then allow the energy to flow to the output while blocking the return path.
The DC converter also uses an Internal Soft-Start circuit to control the current and to reduce the input current surge. The Soft-Start enables the converter to start quickly while limiting the inrush current which can prevent it from tripping the output current limit.
The VE-20N-IY-S DC converter can also be used for applications such as AC/DC and DC/DC topology. It can be used for applications such as AC-DC converters, DC-DC converters, and other power supplies. As a result, it is often used for powering various low-power applications including servers, routers, audio amplifiers, security systems, lighting, and other electronic systems.
The specific data is subject to PDF, and the above content is for reference
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...