VE-21F-MY-B1

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

DC-DC converters such as the VE-21F-MY-B1 are electrical components that allow power to be transferred from one voltage potential to another. This makes them useful in applications where an electrical device or circuit needs to be powered from a different voltage source than it was designed for. It also increases the flexibility of power supply design in applications such as industrial plant automation, energy systems, LED lighting and medical equipment.

They are widely used in industries including automotive, consumer electronics, telecommunications, aerospace, and industrial. The main types of DC-DC converters are isolated and non-isolated, and choosing one depends on the required power levels and safety requirements of the application.

The VE-21F-MY-B1 is a non-isolated DC-DC converter and is designed to convert DC power from one voltage potential to another voltage potential within the same level, such as 24 volts to 12 volts, or 12 volts to 9 volts. It is typically used to provide low noise operation and low EMI emissions for sensitive applications. It also offers excellent regulation and an adjustable output voltage.

The input voltage range for the VE-21F-MY-B1 is 18-36 VDC, and the output voltage can be adjusted from 1-30 VDC. It has an input surge protection of 20A, and can withstand up to 30A of short duration surge current. The input current of the converter is typical 6A at 25C, with an output power of 120W. It has a maximum Line regulation of 0.2%, and a Load regulation of 0.3%, as well as a switching frequency of 450 kHz.

The VE-21F-MY-B1 is designed with an active Short Circuit protection (SCP), Over voltage protection (OVP) and Over Current protection (OCP). It is also designed with an intelligent circuitry, which slows down the output voltage when it reaches a certain limit. The device is noise filtered to ensure no interference is emitted by the device itself. Its package includes an input capacitor, an output capacitor, a EMI filter, and an output diode.

The main components of the power converter are a primary circuit which forms the input stage, an output stage for the voltage regulation, and a feedback circuit which controls the output phase of the power converter. The input stage is formed by a MOSFET (or FET) which switches the input voltage from the positive terminal to the negative terminal. This generates a high frequency voltage signal. The output stage is formed by a linear regulator which is used to convert the high frequency voltage signal into the desired output voltage.

The feedback circuit is used to maintain the output voltage at a constant level. This is done by comparing the output voltage with the reference voltage and if the difference is too large, then the feedback circuit sends a signal to the primary stage to reduce the switching frequency. This reduces the output voltage and brings it back to the required level.

The VE-21F-MY-B1 is a reliable and cost effective DC-DC converter that can be used in a variety of industrial and commercial applications. Its compact size and high efficiency make it ideal for applications where space is limited and high efficiency is required. The device is also designed to be robust and reliable, so it can be deployed in tough industrial environments.

The specific data is subject to PDF, and the above content is for reference