| Allicdata Part #: | VE-21K-IW-F1-ND |
| Manufacturer Part#: |
VE-21K-IW-F1 |
| Price: | $ 0.00 |
| Product Category: | Power Supplies - Board Mount |
| Manufacturer: | Vicor Corporation |
| Short Description: | DC DC CONVERTER 40V 100W |
| More Detail: | Isolated Module DC DC Converter 1 Output 40V 2.... |
| DataSheet: |  VE-21K-IW-F1 Datasheet/PDF |
| Quantity: | 1000 |
| 1 +: | 0.00000 |
| Current - Output (Max): | 2.5A |
| Size / Dimension: | 4.60" L x 1.86" W x 0.79" H (116.8mm x 47.2mm x 20.1mm) |
| Package / Case: | Full Brick |
| Mounting Type: | Through Hole |
| Efficiency: | 90% |
| Operating Temperature: | -40°C ~ 85°C |
| Features: | OCP, OTP, OVP, SCP |
| Applications: | ITE (Commercial) |
| Voltage - Isolation: | 3kV |
| Power (Watts): | 100W |
| Series: | VE-200™ |
| Voltage - Output 3: | -- |
| Voltage - Output 2: | -- |
| Voltage - Output 1: | 40V |
| Voltage - Input (Max): | 32V |
| Voltage - Input (Min): | 21V |
| Number of Outputs: | 1 |
| Type: | Isolated Module |
| Part Status: | Active |
| Packaging: | Bulk |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
DC-DC converters convert direct current (DC) from one voltage level to another. The VE-21K-IW-F1 DC-DC converter is designed to convert an input voltage of up to 26.4 volts to an output adjustable up to 21V. The device can be used in a variety of applications like controlling lighting, sensors, and other low voltage loads.
The VE-21K-IW-F1 DC-DC converter is a high efficiency module that operates from wide input voltages ranging from 12V to 26.4V. It has a wide operating temperature range and can handle up to 21V output current. The device is capable of providing up to 90% efficiency while delivering good line/load regulation and low noise performance. The device features an adjustable output voltage and current protection that enables it to operate without inducing any damage to the load.
The working principle of the VE-21K-IW-F1 DC-DC converter is based on the use of a power switch located inside the module. When power is applied to the device, the power switch turns on and off at a fixed frequency. This creates an alternating current (AC) which is then rectified to produce a DC output voltage. This output voltage is then regulated by adjusting the duty cycle of the power switch.
The VE-21K-IW-F1 DC-DC converter can be used in a wide range of applications including driving onboard lighting or remote sensor loads. It is also suitable for powering small portable electronics such as mobile phones or tablets. The adjustable feature of the device allows it to be used in a variety of systems, as the output voltages can be adjusted to match the system requirements. Additionally, the device has a high level of protection to ensure a safe and secure operation.
The VE-21K-IW-F1 DC-DC converter has been designed to provide reliable power conversion and to reduce system cost, power dissipation, and overall risk. Its high operating efficiency and wide input voltage range makes it an ideal choice for mobile applications where a reliable alternative power source is required.
The specific data is subject to PDF, and the above content is for reference
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...