Allicdata Part #: | VE-24K-CX-F2-ND |
Manufacturer Part#: |
VE-24K-CX-F2 |
Price: | $ 0.00 |
Product Category: | Power Supplies - Board Mount |
Manufacturer: | Vicor Corporation |
Short Description: | DC DC CONVERTER 40V 75W |
More Detail: | Isolated Module DC DC Converter 1 Output 40V 1.... |
DataSheet: | VE-24K-CX-F2 Datasheet/PDF |
Quantity: | 1000 |
1 +: | 0.00000 |
Current - Output (Max): | 1.88A |
Size / Dimension: | 4.60" L x 1.86" W x 1.05" H (116.8mm x 47.2mm x 26.7mm) |
Package / Case: | Full Brick |
Mounting Type: | Through Hole |
Efficiency: | 90% |
Operating Temperature: | -25°C ~ 85°C |
Features: | OCP, OTP, OVP, SCP |
Applications: | ITE (Commercial) |
Voltage - Isolation: | 3kV |
Power (Watts): | 75W |
Series: | VE-200™ |
Voltage - Output 3: | -- |
Voltage - Output 2: | -- |
Voltage - Output 1: | 40V |
Voltage - Input (Max): | 100V |
Voltage - Input (Min): | 55V |
Number of Outputs: | 1 |
Type: | Isolated Module |
Part Status: | Active |
Packaging: | Bulk |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
DC-DC converters are electrical circuits, which are used to convert one type of DC (direct current) energy to another. They are commonly used in industrial, automotive, and computer electronics applications. The VE-24K-CX-F2 is a DC-DC converter used to convert high voltage DC energy into much lower voltage DC energy.
The VE-24K-CX-F2 is designed for high-voltage, low-power applications such as electric vehicle (EV) charging. It features a wide input voltage range from 18V-90V, and unlike other high-voltage DC-DC converters, offers a very low no-load power consumption of just 10mW. This makes it ideal for applications that require low power and high efficiency, such as in EV battery chargers.
The VE-24K-CX-F2 can output up to 24V of regulated DC power. For safety, the converter also offers thermal protection and an over-voltage protection (OVP) circuit. This ensures that the output voltage never exceeds the set voltage level even if the input voltage rises above the normal operating range.
The VE-24K-CX-F2 is based on a switching topology. It works by converting high voltage DC power to a much lower voltage level using a high-frequency switching circuit. The switching circuit alternates between a high and a low power state to maintain a regulated output voltage. Since the power is only consumed during the ‘on’ state of switching, the converter is very efficient and can operate at a higher frequency (typically >100kHz). This increases its efficiency further, as the switching losses are reduced.
The VE-24K-CX-F2 is a reliable, high-efficiency DC-DC converter designed for use in electric vehicle charging and other 15-90V applications. It provides a low-voltage, high-current output with low no-load power consumption and high efficiency. It features thermal protection and over-voltage protection to ensure safety and reliability even at high input voltages.
The specific data is subject to PDF, and the above content is for reference
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...