| Allicdata Part #: | VE-24L-CW-ND |
| Manufacturer Part#: |
VE-24L-CW |
| Price: | $ 142.92 |
| Product Category: | Power Supplies - Board Mount |
| Manufacturer: | Vicor Corporation |
| Short Description: | DC DC CONVERTER 28V 100W |
| More Detail: | Isolated Module DC DC Converter 1 Output 28V 3.... |
| DataSheet: |  VE-24L-CW Datasheet/PDF |
| Quantity: | 1000 |
| 1 +: | $ 129.93100 |
| Current - Output (Max): | 3.57A |
| Size / Dimension: | 4.60" L x 2.40" W x 0.50" H (116.8mm x 61.0mm x 12.7mm) |
| Package / Case: | Full Brick |
| Mounting Type: | Through Hole |
| Efficiency: | 90% |
| Operating Temperature: | -25°C ~ 85°C |
| Features: | OCP, OTP, OVP, SCP |
| Applications: | ITE (Commercial) |
| Voltage - Isolation: | 3kV |
| Power (Watts): | 100W |
| Series: | VE-200™ |
| Voltage - Output 3: | -- |
| Voltage - Output 2: | -- |
| Voltage - Output 1: | 28V |
| Voltage - Input (Max): | 100V |
| Voltage - Input (Min): | 55V |
| Number of Outputs: | 1 |
| Type: | Isolated Module |
| Part Status: | Active |
| Packaging: | Bulk |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
DC-DC converters are widely used power conversion components in hardware applications, and the VE-24L-CW is one of the most common DC-DC converters seen in modern applications.The VE-24L-CW has an operating power range of 18-36v and output voltage of 24v, with an output current of 1.2A (maximum). It is an isolated, single channel circuit, and is mainly used for providing power to low voltage components in devices such as computers, routers, and switches.
The main characteristics of the VE-24L-CW include its high efficiency, low ripple, and fast transient response. The efficiency of up to 92%, combined with a low standby power consumption of less than 0.5W, makes it a very important component of power-saving applications. The low output ripple ensures smooth and reliable operation of the connected components, while the fast transient response allows for quick changes in load conditions.
The working principle of the VE-24L-CW is based on a combination of switching and linear control techniques. The primary side of the converter operates as a boost circuit, where the power supplied by the input voltage is increased to a higher level. This higher voltage is then used to drive the secondary side, consisting of a synchronous rectification topology and a current mode controller. The primary circuit operates in a pulse width modulation (PWM) mode where the duty ratio of the power switching element is adjusted to achieve the required output voltage. This is done by comparing the voltage with the voltage reference and then adjusting the frequency at which the switching element operates. The current mode controller then controls the output current of the converter to ensure that it does not exceed the rated value.
The VE-24L-CW is a highly efficient, low ripple, and fast transient response DC-DC converter and can be used in a wide range of applications. It is especially well suited for power-saving applications that require dc to dc conversion with an operational input voltage range of 18-36v. Its highly efficient design combined with its fast transient response and low ripple output make it an extremely versatile and useful component in any electrical device.
The specific data is subject to PDF, and the above content is for reference
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...