| Allicdata Part #: | VE-24N-MX-B1-ND |
| Manufacturer Part#: |
VE-24N-MX-B1 |
| Price: | $ 0.00 |
| Product Category: | Power Supplies - Board Mount |
| Manufacturer: | Vicor Corporation |
| Short Description: | DC DC CONVERTER 18.5V 75W |
| More Detail: | Isolated Module DC DC Converter 1 Output 18.5V ... |
| DataSheet: |  VE-24N-MX-B1 Datasheet/PDF |
| Quantity: | 1000 |
| 1 +: | 0.00000 |
| Current - Output (Max): | 4.05A |
| Size / Dimension: | 4.60" L x 2.40" W x 1.07" H (116.8mm x 61.0mm x 27.1mm) |
| Package / Case: | Full Brick |
| Mounting Type: | Through Hole |
| Efficiency: | 90% |
| Operating Temperature: | -55°C ~ 85°C |
| Features: | OCP, OTP, OVP, SCP |
| Applications: | ITE (Commercial) |
| Voltage - Isolation: | 3kV |
| Power (Watts): | 75W |
| Series: | VE-200™ |
| Voltage - Output 3: | -- |
| Voltage - Output 2: | -- |
| Voltage - Output 1: | 18.5V |
| Voltage - Input (Max): | 100V |
| Voltage - Input (Min): | 55V |
| Number of Outputs: | 1 |
| Type: | Isolated Module |
| Part Status: | Active |
| Packaging: | Bulk |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
DC DC converters are devices used to convert direct current (DC) into a lower or higher voltage power source. The VE-24N-MX-B1 is a device that can take an input of 24V DC and output a regulated voltage of up to 24V DC at a maximum load of 5A. This device is widely used in a variety of applications where reliable and efficient power conversion is needed.
The VE-24N-MX-B1 is a non-isolated DC DC converter that uses pulse width modulation (PWM) to control the output voltage. It employs four power MOSFET gates, which are connected to the load in parallel, and can be used to provide a stable and efficient power conversion. The circuit utilizes two loop control stages, the first to maintain the output voltage and the second to control the current sense and provide the output protection. This ensures that the power is converted reliably and efficiently, allowing for a wide range of applications.
The VE-24N-MX-B1 is designed to be used in applications requiring a voltage source between 12V and 24V, such as electrical automotive systems, communications systems, industrial control systems, and consumer electronics. The device can be used to provide power to a wide variety of devices, such as radios, lighting systems, communications devices, motors, computers, and other electronic components. The device also provides voltage and current protection and has an adjustable current limit for added safety.
The VE-24N-MX-B1 can also be used in applications that require higher output voltages. It is capable of providing up to three times the input voltage, up to 72V DC, with a maximum output current of 10A. This makes it ideal for applications with higher power requirements, such as charging systems or powering large devices.
The VE-24N-MX-B1 is a highly efficient and reliable DC-DC converter. It operates at a typical efficiency of 92% and can provide clean and stable power to a wide range of devices and applications. The device is designed to be easily installed and can be used in a wide variety of environments. Its low cost and wide range of features make it an ideal choice for any application that requires reliable and efficient power conversion.
The specific data is subject to PDF, and the above content is for reference
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...