VE-24V-EW-F2

Current - Output (Max):	17.24A
Size / Dimension:	4.60" L x 1.86" W x 1.05" H (116.8mm x 47.2mm x 26.7mm)
Package / Case:	Full Brick
Mounting Type:	Through Hole
Efficiency:	88%
Operating Temperature:	-10°C ~ 85°C
Features:	OCP, OTP, OVP, SCP
Applications:	ITE (Commercial)
Voltage - Isolation:	3kV
Power (Watts):	100W
Series:	VE-200™
Voltage - Output 3:	--
Voltage - Output 2:	--
Voltage - Output 1:	5.8V
Voltage - Input (Max):	100V
Voltage - Input (Min):	55V
Number of Outputs:	1
Type:	Isolated Module
Part Status:	Active
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

DC DC Converters

DC-DC Converters are the most common type of power converter, and are used in a variety of applications. They are used in aerospace, automotive, industrial, and consumer applications, and in some cases, can provide an efficient way to convert electrical energy from one form to another.

VE-24V-EW-F2 DC DC Converters

The VE-24V-EW-F2 is a DC-DC converter designed for a wide range of applications, including aerospace, automotive, industrial, and consumer applications. With a maximum input voltage of 24V and an output voltage of 24V, the VE-24V-EW-F2 is designed for 12V systems requiring an 8V or 24V output. The device features an adjustable output voltage that can be set from 8V to 24V, a high efficiency of 95%, and a wide temperature range of -40°C to 85°C.

VE-24V-EW-F2 Application Field and Working Principle

The VE-24V-EW-F2 DC-DC converter is designed for applications requiring a reliable power supply, such as industrial, aerospace, automotive, and consumer applications. The device features an adjustable output voltage from 8V to 24V, which can be set depending on the application requirements. In addition, the device’s high efficiency of 95% enables it to create a clean power signal with less noise than other converters. The working principle behind the VE-24V-EW-F2 is simple and efficient. The input voltage is first rectified to DC, and then filtered to sensor the voltage ripple. The DC voltage is then applied to a DC-to-DC converter, which converts the input voltage to the required output voltage. The DC-to-DC converter uses the input voltage and a varying frequency pulse to control the output voltage. This type of converter is known as a pulse-width modulation (PWM) converter. The output voltage of the PWM converter is then regulated using two components, a low-side switch and a high-side switch. The switches control the amount of energy that is delivered to the load, and regulate the output voltage to the desired level.

The specific data is subject to PDF, and the above content is for reference