VE-25F-MV-F1

Current - Output (Max):	2.08A
Size / Dimension:	4.60" L x 1.86" W x 0.79" H (116.8mm x 47.2mm x 20.1mm)
Package / Case:	Full Brick
Mounting Type:	Through Hole
Efficiency:	90%
Operating Temperature:	-55°C ~ 85°C
Features:	OCP, OTP, OVP, SCP
Applications:	ITE (Commercial)
Voltage - Isolation:	3kV
Power (Watts):	150W
Series:	VE-200™
Voltage - Output 3:	--
Voltage - Output 2:	--
Voltage - Output 1:	72V
Voltage - Input (Max):	200V
Voltage - Input (Min):	100V
Number of Outputs:	1
Type:	Isolated Module
Part Status:	Active
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

DC DC converters, such as the VE-25F-MV-F1, are used to convert power from one voltage level from a higher voltage to a lower voltage, or from direct current (DC) to alternating current (AC). DC converters are usually used for industrial or commercial applications, such as computers, server racks, and telecommunications systems. This type of converter is capable of changing the amount of voltage available to a varying degree, as required.The VE-25F-MV-F1 converter is a multi-voltage, multi-switch, full-bridge DC converter that can produce an output voltage of 1V to 24V and an input voltage of 12V to 48V. This type of converter is particularly suited for automotive and industrial applications due to its ability to adjust its output voltage according to the specific requirements of the application. It is also capable of delivering a higher power output than other similar DC converters.The working principle of a DC DC converter is based on the principle of electrical transformer. It consists of two coils of wire wound in a single core and separated by a thin material known as "insulation." The input voltage source is connected to one of these coils, and as current passes through it, a magnetic field is created. This magnetic field induces a current in the other coil, which results in an output voltage that is lower than the input voltage source.The major components of a DC DC converter are the transformer, bridge rectifier (diode), and output filters. The transformer steps down the input voltage from the higher voltage source to the output voltage, depending on the turns ratio of the transformer\'s two coils. The bridge rectifier acts as a rectifier; it converts the AC signal from the transformer to DC voltage. Finally, the output filters are used to reduce the ripple in the output voltage, thus providing a regulated output voltage.The VE-25F-MV-F1 DC DC converter is primarily used for power conversion applications. Its adjustable voltage output capabilities make it suitable for a variety of different applications, including automotive, telecommunications, and industrial applications. The adjustable voltage output allows users to regulate the amount of voltage delivered to their load, in order to meet their specific requirements.In addition, the VE-25F-MV-F1 DC DC converter is designed with a number of protection functions to protect against over-voltage, over-current, and short-circuit conditions. The built-in protection functions also include over-temperature protection, which helps to prevent damage to the converter in extreme temperature conditions.In summary, the VE-25F-MV-F1 DC DC converter is a multi-voltage, multi-switch, full-bridge DC converter designed for industrial and commercial applications. Its adjustable output voltage, high efficiency, and built-in protection functions make it an ideal choice for a wide variety of power conversion applications.

The specific data is subject to PDF, and the above content is for reference