
Allicdata Part #: | VE-25J-IX-F1-ND |
Manufacturer Part#: |
VE-25J-IX-F1 |
Price: | $ 0.00 |
Product Category: | Power Supplies - Board Mount |
Manufacturer: | Vicor Corporation |
Short Description: | DC DC CONVERTER 36V 75W |
More Detail: | Isolated Module DC DC Converter 1 Output 36V 2.... |
DataSheet: | ![]() |
Quantity: | 1000 |
1 +: | 0.00000 |
Current - Output (Max): | 2.08A |
Size / Dimension: | 4.60" L x 1.86" W x 0.79" H (116.8mm x 47.2mm x 20.1mm) |
Package / Case: | Full Brick |
Mounting Type: | Through Hole |
Efficiency: | 90% |
Operating Temperature: | -40°C ~ 85°C |
Features: | OCP, OTP, OVP, SCP |
Applications: | ITE (Commercial) |
Voltage - Isolation: | 3kV |
Power (Watts): | 75W |
Series: | VE-200™ |
Voltage - Output 3: | -- |
Voltage - Output 2: | -- |
Voltage - Output 1: | 36V |
Voltage - Input (Max): | 200V |
Voltage - Input (Min): | 100V |
Number of Outputs: | 1 |
Type: | Isolated Module |
Part Status: | Active |
Packaging: | Bulk |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
DC DC Converters
DC DC converters are power converters used to process electrical signals between different volts and frequencies. One such converter is the VE-25J-IX-F1, which is often used in telecommunications and industrial applications.
Application Field
The VE-25J-IX-F1 DC DC converter is designed for applications for communication systems, industrial switching systems, and other parts of computer networks. This converter can handle voltages ranging from 12-32VDC and can be adjusted for current levels of between 0.25A and 4A depending on the specific installation.
In communications systems, the VE-25J-IX-F1 provides the necessary power to run devices at a lower voltage than the system. This converter is also often used to provide power to sensors or low-power devices.
In industrial applications, the VE-25J-IX-F1 is often used to provide power to power or control circuits.
Working Principle
The VE-25J-IX-F1 works by converting one DC voltage to another. The starting point is the input voltage, which can range from 12-32VDC. This voltage is then stepped down to a lower level and then regulated at a constant level. Depending on the application, the output voltage can be set to any voltage within that range.
The VE-25J-IX-F1 DC DC converter uses a pulse width modulation (PWM) circuit to regulate the output. This PWM circuit uses an error amplifier, comparator and flip-flop to compare the desired output voltage with the actual output voltage. If the two voltages are not the same, the circuit toggles the switching pulses to regulate the output voltage.
DC DC converters are essential components in a wide variety of devices and applications. The VE-25J-IX-F1 is ideal for providing power to communication systems, industrial switching systems, and other small-voltage, low-power systems.
The specific data is subject to PDF, and the above content is for reference
DC DC CONVERTER 12V 240WIsolated Module ...

DC DC CONVERTER 12V 240WIsolated Module ...

DC DC CONVERTER 12V 240WIsolated Module ...

DC DC CONVERTER 1.8V 120WIsolated Module...

DC DC CONVERTER 1.8V 120WIsolated Module...

DC DC CONVERTER 1.8V 120WIsolated Module...
