| Allicdata Part #: | VE-26B-EU-F2-ND |
| Manufacturer Part#: |
VE-26B-EU-F2 |
| Price: | $ 0.00 |
| Product Category: | Power Supplies - Board Mount |
| Manufacturer: | Vicor Corporation |
| Short Description: | DC DC CONVERTER 95V 200W |
| More Detail: | Isolated Module DC DC Converter 1 Output 95V 2.... |
| DataSheet: |  VE-26B-EU-F2 Datasheet/PDF |
| Quantity: | 1000 |
| 1 +: | 0.00000 |
| Current - Output (Max): | 2.11A |
| Size / Dimension: | 4.60" L x 1.86" W x 1.05" H (116.8mm x 47.2mm x 26.7mm) |
| Package / Case: | Full Brick |
| Mounting Type: | Through Hole |
| Efficiency: | 88% |
| Operating Temperature: | -10°C ~ 85°C |
| Features: | OCP, OTP, OVP, SCP |
| Applications: | ITE (Commercial) |
| Voltage - Isolation: | 3kV |
| Power (Watts): | 200W |
| Series: | VE-200™ |
| Voltage - Output 3: | -- |
| Voltage - Output 2: | -- |
| Voltage - Output 1: | 95V |
| Voltage - Input (Max): | 400V |
| Voltage - Input (Min): | 200V |
| Number of Outputs: | 1 |
| Type: | Isolated Module |
| Part Status: | Active |
| Packaging: | Bulk |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
DC DC converters, also known as DC-to-DC conversion, are electronic devices that convert electrical energy from one direct current (DC) to another. The VE-26B-EU-F2 is a type of DC-DC converter specifically designed to convert a DC voltage input to another DC voltage output. It is suitable for various applications and offers reliable performance and protection.
The VE-26B-EU-F2 can accept an input voltage from 4.75 volts to 36 volts and has an adjustable output voltage from 2.5 volts to 28 volts. It provides an output current of up to 10 amps, a power of up to 200 watts, and an output voltage ripple of less than 1%. The device features an overload and over current protection, temperature-control fan operation, and an output power-good signal. The package is designed for space-constrained applications with a volume of just 6 square inches.
The VE-26B-EU-F2 has a wide range of applications, including low power DC/DC Converting, industrial/commercial applications, medical applications, communications applications, and more. Additionally, it can be used in a variety of power supply designs, such as step-up, step-down, and negative/positive outputs.
The working principle of the VE-26B-EU-F2 is based on a switching regulator. It uses a high-frequency oscillator to drive two transistors; one acts as a switch that turns on and off to control the amount of current flowing through the converter. The other acts as a rectifier to convert AC voltage into DC voltage. When the switch is open, the current stops flowing and the output voltage will drop. When the switch is closed, the current starts flowing and the output voltage will rise. The switching regulator can efficiently manage the conversion of differing input voltages into a desired output voltage.
The VE-26B-EU-F2 is an efficient and reliable DC-DC converter that is suitable for a variety of applications. It has a wide range of input voltage with adjustable output voltage. Additionally, it features an overload protection and a temperature-control fan operation, which serve to protect the device and ensure its proper performance.
The specific data is subject to PDF, and the above content is for reference
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...