| Allicdata Part #: | VE-274-EW-F3-ND |
| Manufacturer Part#: |
VE-274-EW-F3 |
| Price: | $ 0.00 |
| Product Category: | Power Supplies - Board Mount |
| Manufacturer: | Vicor Corporation |
| Short Description: | DC DC CONVERTER 48V 100W |
| More Detail: | Isolated Module DC DC Converter 1 Output 48V 2.... |
| DataSheet: |  VE-274-EW-F3 Datasheet/PDF |
| Quantity: | 1000 |
| 1 +: | 0.00000 |
| Current - Output (Max): | 2.08A |
| Size / Dimension: | 4.60" L x 1.86" W x 0.79" H (116.8mm x 47.2mm x 20.1mm) |
| Package / Case: | Full Brick |
| Mounting Type: | Through Hole |
| Efficiency: | 88% |
| Operating Temperature: | -10°C ~ 85°C |
| Features: | OCP, OTP, OVP, SCP |
| Applications: | ITE (Commercial) |
| Voltage - Isolation: | 3kV |
| Power (Watts): | 100W |
| Series: | VE-200™ |
| Voltage - Output 3: | -- |
| Voltage - Output 2: | -- |
| Voltage - Output 1: | 48V |
| Voltage - Input (Max): | 375V |
| Voltage - Input (Min): | 100V |
| Number of Outputs: | 1 |
| Type: | Isolated Module |
| Part Status: | Active |
| Packaging: | Bulk |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
DC DC converters are widely used in all kinds of applications in the electronic industry, and the VE-274-EW-F3 is a great example of this. This versatile device utilises a cutting-edge technology to convert low voltage DC power into higher voltage DC power, making it a great choice for a variety of applications.
The VE-274-EW-F3 is a high efficiency, low ripple device, which makes it ideal for demanding applications like LED drivers, power supplies, and solar inverters. It is designed to accept wide input voltage ranging from 12V to 48V, and offers two independent DC output voltage ranges – 8V to 28V and 20V to 40V. Both outputs can be conveniently adjusted using internal potentiometers, so the device can be tailored to meet exact application requirements.
The internals of the VE-274-EW-F3 are efficient enough to produce an output power up to 400W, depending on the input voltage. It is built with features such as overload, short circuit, overvoltage, and reverse input protection, making it a safe device to operate in any kind of environment. Additionally, the device supports a range of temperature settings, making it capable of auto-adjusting to the environment.
The working principle behind the VE-274-EW-F3 is relatively simple. At the heart, it is an isolated DC-DC converter, which uses a PWM signal divided into multiple pulses to control the input current. The converter itself consists of two independent rectifiers, one for the high voltage output and one for the low voltage output. The PWM signal is used to control the switching ratio, which determines the output voltage. The voltage is then detected and sent to the external potentiometer, allowing for fine tuning of the output voltages.
The VE-274-EW-F3 DC-DC converter is a reliable and economical device that can be used in a variety of applications. Its versatility and simple working principle make it an ideal choice for LED drivers, power supplies, and solar inverters. Its high efficiency and wide input voltage range allow it to be used in a range of demanding applications. Additionally, its overload, short circuit, overvoltage, and reverse input protection features make it a safe and reliable device.
The specific data is subject to PDF, and the above content is for reference
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...