| Allicdata Part #: | VE-2N2-IY-F3-ND |
| Manufacturer Part#: |
VE-2N2-IY-F3 |
| Price: | $ 0.00 |
| Product Category: | Power Supplies - Board Mount |
| Manufacturer: | Vicor Corporation |
| Short Description: | DC DC CONVERTER 15V 50W |
| More Detail: | Isolated Module DC DC Converter 1 Output 15V 3.... |
| DataSheet: |  VE-2N2-IY-F3 Datasheet/PDF |
| Quantity: | 1000 |
| 1 +: | 0.00000 |
| Current - Output (Max): | 3.33A |
| Size / Dimension: | 4.60" L x 1.86" W x 0.79" H (116.8mm x 47.2mm x 20.1mm) |
| Package / Case: | Full Brick |
| Mounting Type: | Through Hole |
| Efficiency: | 90% |
| Operating Temperature: | -40°C ~ 85°C |
| Features: | OCP, OTP, OVP, SCP |
| Applications: | ITE (Commercial) |
| Voltage - Isolation: | 3kV |
| Power (Watts): | 50W |
| Series: | VE-200™ |
| Voltage - Output 3: | -- |
| Voltage - Output 2: | -- |
| Voltage - Output 1: | 15V |
| Voltage - Input (Max): | 76V |
| Voltage - Input (Min): | 36V |
| Number of Outputs: | 1 |
| Type: | Isolated Module |
| Part Status: | Active |
| Packaging: | Bulk |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
DC DC Converters are devices used to convert direct current from one voltage level to another. DC DC converters are an important component of many electrical systems, allowing for efficient power conversion where a large voltage change is required. These devices have been used in a variety of applications, including automotive, aviation, and industrial power systems.
The VE-2N2-IY-F3 is a type of DC DC converter that is used in a variety of applications. It can be used for 48V automotive systems, battery charging, and renewable energy systems. It has an input voltage range of 10V to 40V, and an output voltage range of 0.8V to 35V. The maximum output current is 2A, and the maximum output power is 70W.
The VE-2N2-IY-F3 is a non-isolated DC DC converter, which means that it does not provide galvanic isolation between the input and output circuits. This means that any electrical noise and interference present on the input can be transferred directly to the output. Therefore, the converter must be carefully designed and shielded to ensure that the output is not contaminated by the input.
The working principle of the VE-2N2-IY-F3 is relatively simple. The converter consists of a switching circuit, rectifiers, and smoothing components. The input DC voltage is converted into a high frequency pulse-width modulation (PWM) signal by the switching circuit. The rectifier then converts the PWM signal into a steady DC voltage, and the smoothing components provide a constant current to the output. This output voltage can then be adjusted with the built-in potentiometer.
The VE-2N2-IY-F3 can be used in a variety of applications where a small voltage change is required. It is commonly used in automotive systems, renewable energy systems, and portable electronics. It is also an ideal solution when a battery charging system needs an adjustable output voltage, allowing for optimal charging of the battery.
The VE-2N2-IY-F3 is a powerful yet flexible DC DC converter that can be used in a variety of applications. It has an input voltage range of 10V to 40V, and an output voltage range of 0.8V to 35V. The maximum output current is 2A, and the maximum output power is 70W. This makes it an ideal solution for applications where a small voltage change is required, such as automotive systems, renewable energy systems, and battery charging systems.
The specific data is subject to PDF, and the above content is for reference
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...