| Allicdata Part #: | VE-2NB-MX-ND |
| Manufacturer Part#: |
VE-2NB-MX |
| Price: | $ 0.00 |
| Product Category: | Power Supplies - Board Mount |
| Manufacturer: | Vicor Corporation |
| Short Description: | DC DC CONVERTER 95V 75W |
| More Detail: | Isolated Module DC DC Converter 1 Output 95V 79... |
| DataSheet: |  VE-2NB-MX Datasheet/PDF |
| Quantity: | 1000 |
| 1 +: | 0.00000 |
| Current - Output (Max): | 790mA |
| Size / Dimension: | 4.60" L x 2.40" W x 0.50" H (116.8mm x 61.0mm x 12.7mm) |
| Package / Case: | Full Brick |
| Mounting Type: | Through Hole |
| Efficiency: | 90% |
| Operating Temperature: | -55°C ~ 85°C |
| Features: | OCP, OTP, OVP, SCP |
| Applications: | ITE (Commercial) |
| Voltage - Isolation: | 3kV |
| Power (Watts): | 75W |
| Series: | VE-200™ |
| Voltage - Output 3: | -- |
| Voltage - Output 2: | -- |
| Voltage - Output 1: | 95V |
| Voltage - Input (Max): | 76V |
| Voltage - Input (Min): | 36V |
| Number of Outputs: | 1 |
| Type: | Isolated Module |
| Part Status: | Active |
| Packaging: | Bulk |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
DC DC Converters
A DC-DC converter, also known as a DC-DC converter, is a device that converts direct current (DC) to direct current (DC) or a DC-to-AC voltage level converter. DC-DC converters are used to regulate and switch the voltage level or power supply type of various electronic devices. There are several types of converters available, including step-down converters, step-up converters, voltage regulators, inverters, and boost converters.
VE-2NB-MX Application Field and Working Principle
VE-2NB-MX is a type of step-down switching regulator. It is designed to take a high input voltage, typically between 6.5 to 29 V, and convert it to a precise, regulated low output voltage. It is a highly efficient switch mode DC-DC voltage regulator which provides a small form factor and low output ripple noise.
The VE-2NB-MX uses an internal power transistor switch which is connected to an inductor. The transition from on state to off state causes the inductor to provide an opposing voltage thus preventing the output voltage from rising abruptly and thus regulating the output voltage. It can also be used as a high-capacity battery charger. The VE-2NB-MX is highly efficient with typical efficiency ratings as high as 95%.
The VE-2NB-MX is typically used to power microprocessors, microcontroller, logic circuits, analog and digital circuitry, buttons and switches, as well as to increase voltage in a power supply system. It is also used in industrial, home automation, medical and automotive applications. It is ideal for applications which require low quiescent current, high power efficiency, low ripple and noise, and high temperatures. It is also suitable for battery-powered applications as it has a low quiescent current.
The VE-2NB-MX has a wide range of input and output voltages, fast transient response, soft start, and overload protection. It uses a synchronous rectifier to achieve high efficiency and good noise immunity. It also has under-voltage lockout protection and over-temperature shutdown protection. The heat sink on the back of the device helps to extend the working life of the device.
The specific data is subject to PDF, and the above content is for reference
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...