| Allicdata Part #: | VE-2NJ-CW-ND |
| Manufacturer Part#: |
VE-2NJ-CW |
| Price: | $ 0.00 |
| Product Category: | Power Supplies - Board Mount |
| Manufacturer: | Vicor Corporation |
| Short Description: | DC DC CONVERTER 36V 100W |
| More Detail: | Isolated Module DC DC Converter 1 Output 36V 2.... |
| DataSheet: |  VE-2NJ-CW Datasheet/PDF |
| Quantity: | 1000 |
| 1 +: | 0.00000 |
| Current - Output (Max): | 2.78A |
| Size / Dimension: | 4.60" L x 2.40" W x 0.50" H (116.8mm x 61.0mm x 12.7mm) |
| Package / Case: | Full Brick |
| Mounting Type: | Through Hole |
| Efficiency: | 90% |
| Operating Temperature: | -25°C ~ 85°C |
| Features: | OCP, OTP, OVP, SCP |
| Applications: | ITE (Commercial) |
| Voltage - Isolation: | 3kV |
| Power (Watts): | 100W |
| Series: | VE-200™ |
| Voltage - Output 3: | -- |
| Voltage - Output 2: | -- |
| Voltage - Output 1: | 36V |
| Voltage - Input (Max): | 76V |
| Voltage - Input (Min): | 36V |
| Number of Outputs: | 1 |
| Type: | Isolated Module |
| Part Status: | Active |
| Packaging: | Bulk |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
DC DC Converters are devices used to supply power from a DC source to a load. They use a series of switching stages to convert one DC voltage level to another. One popular type of converter is the VE-2NJ-CW.
The VE-2NJ-CW is a DC-DC buck converter, meaning it implements a buck-boost frequency control circuit and provides a constant voltage output across a wide input range. It has an adjustable output current limiter which helps protect the device from overcurrent or overload conditions. The switching frequency is set by an adjustable frequency control voltage. The circuit also includes an outer voltage regulator for further protection. The VE-2NJ-CW is capable of providing up to 50W of power at 25A of output current.
The VE-2NJ-CW is most commonly used as a step-down converter in low-power consumer electronics. It is suitable for applications such as mobile phones, PDAs, Bluetooth headsets, digital cameras, MP3 players, and other similar products. It can also be used in industrial control and power measurement applications.
The working principle of the VE-2NJ-CW is based on an inductor-capacitor network. An inductor stores energy in a magnetic field when current passes through it, while a capacitor stores energy in an electric field when current passes through it. The circuit uses the inductor and capacitor to switch the power between the input, output, and control terminals. The switching frequency is set by the voltage on the frequency control pin. The inductor also acts as a filter, which helps reduce the ripple on the output.
The VE-2NJ-CW is a step-down, DC-DC buck converter that provides a constant voltage output across a wide input range. The output current is limited by an adjustable current limiter and further protected by an outer voltage regulator. The operating frequency is set by an adjustable frequency control voltage. This converter is suitable for use in low-power consumer electronics and industrial control applications.
The specific data is subject to PDF, and the above content is for reference
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...