| Allicdata Part #: | VE-2NJ-IV-F1-ND |
| Manufacturer Part#: |
VE-2NJ-IV-F1 |
| Price: | $ 0.00 |
| Product Category: | Power Supplies - Board Mount |
| Manufacturer: | Vicor Corporation |
| Short Description: | DC DC CONVERTER 36V 150W |
| More Detail: | Isolated Module DC DC Converter 1 Output 36V 4.... |
| DataSheet: |  VE-2NJ-IV-F1 Datasheet/PDF |
| Quantity: | 1000 |
| 1 +: | 0.00000 |
| Current - Output (Max): | 4.17A |
| Size / Dimension: | 4.60" L x 1.86" W x 0.79" H (116.8mm x 47.2mm x 20.1mm) |
| Package / Case: | Full Brick |
| Mounting Type: | Through Hole |
| Efficiency: | 90% |
| Operating Temperature: | -40°C ~ 85°C |
| Features: | OCP, OTP, OVP, SCP |
| Applications: | ITE (Commercial) |
| Voltage - Isolation: | 3kV |
| Power (Watts): | 150W |
| Series: | VE-200™ |
| Voltage - Output 3: | -- |
| Voltage - Output 2: | -- |
| Voltage - Output 1: | 36V |
| Voltage - Input (Max): | 76V |
| Voltage - Input (Min): | 36V |
| Number of Outputs: | 1 |
| Type: | Isolated Module |
| Part Status: | Active |
| Packaging: | Bulk |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
DC to DC converters are an important component in the transmission and distribution of electrical energy. They are used to convert from one DC voltage level to another, typically from lower to higher voltage. DC to DC converters provide isolation between the source or load and allow for galvanic isolation. This type of converter is used to increase the output voltage level of the power supply, enabling improved efficiency and a greater range of uses.
The VE-2NJ-IV-F1 is a particular type of DC to DC converter that is used to provide a cost-effective and reliable solution for powering applications that require a high-voltage, low-current power supply. This converter is designed to be rugged and efficient, with its leakage current being less than 1mA. The rated input voltage is 40V to 60V and the output voltage is adjustable from 0 to 650V. It is designed for application in the industrial, telecommunications and aerospace industries.
The VE-2NJ-IV-F1 works by converting the input voltage, typically a 40V-60V DC voltage, to an adjustable output voltage in the 0-650V range, depending on the desired application. The device is designed to operate with high efficiency, providing power regulation, overload protection and insulation in its output circuit. The power converter is designed to be reliable, with protection against short circuit, over voltage, and over current.
The converter has a wide range of application i.e. in the industrial control, telecommunications, aerospace, and medical fields. The VE-2NJ-IV-F1 converter can be used in a variety of applications, ranging from automotive and consumer products to medical and industrial equipment. For example, it can be used to power high-power LED streetlights or provide an adjustable output voltage for a telecommunications network.
In summary, the VE-2NJ-IV-F1 is a DC-DC converter that is designed to provide a cost-effective and reliable solution for a wide variety of applications. It features low leakage current, high efficiency, overload protection, and insulation for its output circuit. Its adjustable output voltage range makes it suitable for a variety of applications, from automotive and consumer products to medical and industrial equipment.
The specific data is subject to PDF, and the above content is for reference
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...