VE-2NT-EW

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

DC-DC converters are electrical circuits or electronic devices used to convert a direct current (DC) input voltage into a DC output voltage of different magnitude and desired frequency. The goal of these converters is to obtain a regulated output voltage regardless of the input conditions. The VE-2NT-EW DC-DC converter is designed specifically to deliver precise power in a range of environmental conditions. It can reduce its output voltage following a load current reduction on its output, to compensate for power losses generated by the environment.

The VE-2NT-EW operates in an open loop control mode, providing a fixed output voltage. It uses an external sense resistor which reduces the output voltage with heavy load in order to maintain a constant output power. This series of converters includes built-in protection against output overcurrent, input reverse polarity, overtemperature and short circuit.

The VE-2NT-EW comes in various voltage conversion ratios, making it a great solution for a wide range of applications. It is featured with a low input to output voltage differential and low output voltage ripple & noise. It can deliver loads up to tens of amps and the output voltage can be programmed within a range of 1 to 25V. It also features a zero-current shutdown for standby applications.

The VE-2NT-EW DC-DC converter utilizes a voltage step-down circuit composed by a power transistor, an inductor, a diode, and a capacitor. The input voltage is driven onto the primary winding of the inductor, the energy is stored in magnetic form, and then it is released through the secondary winding. The diode rectifies the AC voltage to a DC voltage which then passes through the capacitor and goes to the output voltage.

A key component of the converter is the power transistor which functions as a controllable switch. It is turned from its ON to its OFF state and vice versa via a control signal from the converter\'s control IC. The control signal causes the transistor to remain either fully "on" or "off". The inductors used in this converter can also be designed in order to reduce the overall size of the device and to increase efficiency.

The VE-2NT-EW DC-DC converter is perfectly engineered for a variety of commercial and industrial applications. It is designed for 24V to 12V or 5V & 24V to -12V applications as well as low power applications. It can be used to provide power for cameras, medical equipment, robotics, computers, and battery chargers among other applications.

In conclusion, the VE-2NT-EW DC-DC converter is a reliable solution to convert electrical current. It is a cost-effective solution that features multiple voltage conversion ratios and a zero-current shutdown feature for standby applications. It can deliver loads up to tens of amps and the output voltage can be programmed within a range of 1 to 25V, making it perfect for a variety of commercial and industrial applications.

The specific data is subject to PDF, and the above content is for reference