| Allicdata Part #: | VE-2TT-IW-ND |
| Manufacturer Part#: |
VE-2TT-IW |
| Price: | $ 0.00 |
| Product Category: | Power Supplies - Board Mount |
| Manufacturer: | Vicor Corporation |
| Short Description: | DC DC CONVERTER 6.5V 100W |
| More Detail: | Isolated Module DC DC Converter 1 Output 6.5V 1... |
| DataSheet: |  VE-2TT-IW Datasheet/PDF |
| Quantity: | 1000 |
| 1 +: | 0.00000 |
| Current - Output (Max): | 15.38A |
| Size / Dimension: | 4.60" L x 2.40" W x 0.50" H (116.8mm x 61.0mm x 12.7mm) |
| Package / Case: | Full Brick |
| Mounting Type: | Through Hole |
| Efficiency: | 90% |
| Operating Temperature: | -40°C ~ 85°C |
| Features: | OCP, OTP, OVP, SCP |
| Applications: | ITE (Commercial) |
| Voltage - Isolation: | 3kV |
| Power (Watts): | 100W |
| Series: | VE-200™ |
| Voltage - Output 3: | -- |
| Voltage - Output 2: | -- |
| Voltage - Output 1: | 6.5V |
| Voltage - Input (Max): | 160V |
| Voltage - Input (Min): | 66V |
| Number of Outputs: | 1 |
| Type: | Isolated Module |
| Part Status: | Active |
| Packaging: | Bulk |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
A DC-DC converter is a device that converts power from one source into another, usually from AC power to DC power. The VE-2TT-IW is a type of bidirectional DC-DC converter that has been designed to deliver efficient power conversion between two different voltages with minimal loss. The device is used in applications such as grid scale energy storage and off-grid power generation, such as wind and solar power systems.
The VE-2TT-IW offers high efficiency power conversion from AC (alternating current) to DC (direct current), and vice versa. It uses a combination of power semiconductor technologies to minimize energy loss during power conversion. The converter consists of several components including an input AC power source, power semiconductors, a main rectifier, output DC voltage regulator, and an additional rectifier. The power semiconductors control the voltage and current levels in order to get the desired output voltage.
The working principle of the VE-2TT-IW is based on a two-stage conversion process. In the first stage, the input AC power is rectified into a DC voltage at the main rectifier. The secondary rectifier then converts the DC voltage into a higher or lower voltage, depending on the load. The DC voltage is then regulated at the output to get the desired output voltage.
The VE-2TT-IW has a wide range of applications in renewable energy systems, such as wind and solar power systems. It is also used in grid-scale energy storage systems, as well as in off-grid power systems. In these applications, the VE-2TT-IW can be used to efficiently convert large amounts of AC power into DC power, or vice versa, in order to store or distribute power to the user.
The VE-2TT-IW is a highly efficient DC-DC converter that can be used in a variety of applications. It offers the benefit of high efficiency by utilizing power semiconductors and a two-stage conversion process. This makes it an optimal choice for applications where power must be converted from AC to DC, or vice versa, such as grid scale energy storage systems and off-grid power systems.
The specific data is subject to PDF, and the above content is for reference
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...