| Allicdata Part #: | VE-2TT-MX-B1-ND |
| Manufacturer Part#: |
VE-2TT-MX-B1 |
| Price: | $ 0.00 |
| Product Category: | Power Supplies - Board Mount |
| Manufacturer: | Vicor Corporation |
| Short Description: | DC DC CONVERTER 6.5V 75W |
| More Detail: | Isolated Module DC DC Converter 1 Output 6.5V 1... |
| DataSheet: |  VE-2TT-MX-B1 Datasheet/PDF |
| Quantity: | 1000 |
| 1 +: | 0.00000 |
| Current - Output (Max): | 11.54A |
| Size / Dimension: | 4.60" L x 2.40" W x 1.07" H (116.8mm x 61.0mm x 27.1mm) |
| Package / Case: | Full Brick |
| Mounting Type: | Through Hole |
| Efficiency: | 90% |
| Operating Temperature: | -55°C ~ 85°C |
| Features: | OCP, OTP, OVP, SCP |
| Applications: | ITE (Commercial) |
| Voltage - Isolation: | 3kV |
| Power (Watts): | 75W |
| Series: | VE-200™ |
| Voltage - Output 3: | -- |
| Voltage - Output 2: | -- |
| Voltage - Output 1: | 6.5V |
| Voltage - Input (Max): | 160V |
| Voltage - Input (Min): | 66V |
| Number of Outputs: | 1 |
| Type: | Isolated Module |
| Part Status: | Active |
| Packaging: | Bulk |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
DC DC converters are a type of electronic device that converts direct current (DC) signals into alternating current (AC) signals. DC DC Converters are widely used in a wide variety of applications, from consumer electronics and automotive applications to industrial and military applications. The VE-2TT-MX-B1 is a type of DC DC Converter which has gained popularity due to its high efficiency, small size and low cost.
The VE-2TT-MX-B1 is a highly efficient buck-boost converter that can step-down or step-up an input voltage while maintaining regulation and providing good dynamic response. It has three inputs, two buck and one boost, and four separate outputs, each output providing a different voltage. The output voltage can range from 0.8V to 24V. It also has adjustable frequency control which allows it to be tuned to match different device requirements.
The VE-2TT-MX-B1 is ideal for many DC applications such as power supplies, LED lighting, and AC/DC converters. It can be used to replace linear regulators in some instances, providing higher efficiency and better noise characteristics. It can be used to control both AC voltage and DC voltage. It can be used in applications such as surge protectors, battery chargers, intelligent power loads, and motor control.
The VE-2TT-MX-B1 works by taking the input voltage and converting it to the desired output. The converter uses a switching transistor to time the turn on/off of power to the output. The output voltage is regulated by an internal feedback control loop which monitors the output voltage and adjusts the switching frequency accordingly to maintain the desired output voltage.
The VE-2TT-MX-B1 is an efficient and reliable converter for a wide variety of applications. It can be used in a variety of devices such as medical equipment, solar energy, energy storage systems, automotive electronics, uninterruptible power supplies, and DC/DC converters. It is a reliable and cost-effective converter that is easy to install and use.
The specific data is subject to PDF, and the above content is for reference
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...