VE-2TW-CW-F1

Current - Output (Max):	18.18A
Size / Dimension:	4.60" L x 1.86" W x 0.79" H (116.8mm x 47.2mm x 20.1mm)
Package / Case:	Full Brick
Mounting Type:	Through Hole
Efficiency:	90%
Operating Temperature:	-25°C ~ 85°C
Features:	OCP, OTP, OVP, SCP
Applications:	ITE (Commercial)
Voltage - Isolation:	3kV
Power (Watts):	100W
Series:	VE-200™
Voltage - Output 3:	--
Voltage - Output 2:	--
Voltage - Output 1:	5.5V
Voltage - Input (Max):	160V
Voltage - Input (Min):	66V
Number of Outputs:	1
Type:	Isolated Module
Part Status:	Active
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

DC DC Converters

DC-DC converters, or DC-DC power supplies, are devices that convert one DC voltage into another. They are commonly used in applications where a low DC voltage is supplied to a device that requires a higher voltage, such as in many computers and other electronic equipment. A DC-DC converter is also used to step down a high DC voltage for use in low power applications such as LED lighting.The most common type of DC-DC converter is the Push-Pull converter. This type of converter is also referred to as a buck-boost, charge pump, or inverting DC-DC converter. It is the simplest and most efficient type of DC-DC converter and can achieve up to 90% efficiency. It works by using two transistors to "push" and "pull" current through an inductor, with the output voltage being determined by the ratio of push to pull timing.The second type of DC-DC converter is the Buck converter. This is also referred to as a step down converter. It is the most efficient way to convert a higher voltage to a lower voltage, and can achieve up to 96% efficiency. The buck converter works by using an output capacitor in series with a switch, which is controlled by a Pulse Width Modulation (PWM) signal. The output voltage can be adjusted by varying the duty cycle of the PWM signal.The third type of DC-DC converter is the Boost converter. This is sometimes referred to as a step up converter. This type of converter is used to convert a lower input voltage to a higher output voltage. It is popular in applications where the available input voltage is not sufficient to power the required output. The boost converter works by storing the energy in an inductor and then releasing it to the output capacitor when the switch is activated.The fourth type of DC-DC converter is the Flyback converter. This type of converter is similar to the boost converter, but it has an added benefit of being able to transfer energy from the input to the output. This is achieved by using a transformer to store energy from the input and then releasing it to the output capacitor when the switch is switched on.The fifth type of DC-DC converter is the Fly-Back Combined with Forward (FB-CF) converter. This type of converter combines the best of the flyback and forward converters to provide a highly efficient and compact power solution. These converters are used in many applications that require a high efficiency range of output voltages. The FB-CF converter works by storing energy in an inductor, and then releasing it to the output when the switch is opened.The sixth type of DC-DC converter is the Forward-Flyback (FF) converter. This type of converter combines the boost and flyback converter to create a more cost-effective solution. The FF converter works by using the energy stored in an inductor to first boost the input voltage, and then transferring the energy from the output capacitor to the inductor, when the switch is opened. This creates a more efficient, and cost effective, solution for converting higher voltages than can be achieved by the other types of converters.The VE-2TW-CW-F1 is a type of DC-DC converter commonly used in applications where a low DC voltage is supplied to a device that requires a higher voltage. It is a Push-pull converter that is known for its simplicity, high efficiency, and cost effectiveness. It works by using two transistors to "push" and "pull" current through an inductor, with the output voltage being determined by the ratio of push to pull timing. The VE-2TW-CW-F1 is the perfect solution for converting higher voltages to a lower voltage, and is ideal for applications such as LED lighting, computers, and other electronic devices.

The specific data is subject to PDF, and the above content is for reference