VE-2W3-CX-F3

Current - Output (Max):	3.13A
Size / Dimension:	4.60" L x 1.86" W x 0.79" H (116.8mm x 47.2mm x 20.1mm)
Package / Case:	Full Brick
Mounting Type:	Through Hole
Efficiency:	90%
Operating Temperature:	-25°C ~ 85°C
Features:	OCP, OTP, OVP, SCP
Applications:	ITE (Commercial)
Voltage - Isolation:	3kV
Power (Watts):	75W
Series:	VE-200™
Voltage - Output 3:	--
Voltage - Output 2:	--
Voltage - Output 1:	24V
Voltage - Input (Max):	36V
Voltage - Input (Min):	18V
Number of Outputs:	1
Type:	Isolated Module
Part Status:	Active
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

DC DC Converters

DC to DC converters are electrical flow components which are used to convert electrical energy from one voltage level to another. This type of device is necessary when it is required to provide a different voltage level than the available source to power an electronic device or component. The process of converting energy from one level to another is referred to as power conversion, and the two main types of DC to DC converters are linear and switch mode power converters. Linear DC converters are the most straightforward of the two, as they involve use of two resistors and an inductor to ensure DC output stability, rather than relying on a transformer to do so. This type of converter usually has a low frequency operating range (50 kHz or less), which is desirable in some applications. Common applications of this type of converter include lighting systems, communications systems, etc.Switch mode DC converters rely on a combination of power electronic switches, capacitors, and an inductor to provide the desired voltage conversion. These converters operate at higher frequencies (typically up to 100 kHz), and are much more efficient when compared to linear converters. Common applications of this type of converter include battery chargers, DC motor drives, and automotive systems. The VE-2W3-CX-F3 DC to DC converter is a switch mode design which utilizes a highly efficient active power switching circuit. This type of converter is designed for applications requiring a DC output voltage of 3V and a maximum output power of 13W, and is suitable for a wide range of applications such as cellular phones, tablets, and other portable devices. The operating principle of the VE-2W3-CX-F3 converter is based on a standard boost topology, with the high efficiency of the converter being achieved by utilizing a unique sealing structure and an advanced active circuitry. The VE-2W3-CX-F3 also includes undervoltage and overvoltage protection, and a built-in current limiting feature which guards against overloads and circuit damages. The VE-2W3-CX-F3 is also designed for a wide input voltage range, ranging from 7 to 17V, making it suitable for automotive applications. The system also features a low temperature coefficient which ensures the steady performance of the converter over a wide temperature range. In addition, the efficiency of the VE-2W3-CX-F3 converter is over 90% at full load, making it an ideal choice when efficiency is of primary importance. The VE-2W3-CX-F3es allows for easy integration into existing systems, making it one of the most cost effective solutions for applications where low power, high efficiency, and small size are essential. It is also designed to meet the stringent EMC, noise emission, and EMI limits required in automotive applications, making it suitable for the most demanding applications. Overall, the VE-2W3-CX-F3 DC to DC converter is an efficient and reliable solution for applications where low power DC conversion is required. Its advanced active circuitry and sealed structure ensure high efficiency and steady performance, while its wide input voltage range and low noise circuitry make it suitable for automotive and other applications where such parameters are important.

The specific data is subject to PDF, and the above content is for reference