| Allicdata Part #: | VE-2WP-EX-ND |
| Manufacturer Part#: |
VE-2WP-EX |
| Price: | $ 0.00 |
| Product Category: | Power Supplies - Board Mount |
| Manufacturer: | Vicor Corporation |
| Short Description: | DC DC CONVERTER 13.8V 75W |
| More Detail: | Isolated Module DC DC Converter 1 Output 13.8V ... |
| DataSheet: |  VE-2WP-EX Datasheet/PDF |
| Quantity: | 1000 |
| 1 +: | 0.00000 |
| Current - Output (Max): | 5.43A |
| Size / Dimension: | 4.60" L x 2.40" W x 0.50" H (116.8mm x 61.0mm x 12.7mm) |
| Package / Case: | Full Brick |
| Mounting Type: | Through Hole |
| Efficiency: | 88% |
| Operating Temperature: | -10°C ~ 85°C |
| Features: | OCP, OTP, OVP, SCP |
| Applications: | ITE (Commercial) |
| Voltage - Isolation: | 3kV |
| Power (Watts): | 75W |
| Series: | VE-200™ |
| Voltage - Output 3: | -- |
| Voltage - Output 2: | -- |
| Voltage - Output 1: | 13.8V |
| Voltage - Input (Max): | 36V |
| Voltage - Input (Min): | 18V |
| Number of Outputs: | 1 |
| Type: | Isolated Module |
| Part Status: | Active |
| Packaging: | Bulk |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
DC-DC converters are electronic devices that are used to convert a direct current (DC) power source from one voltage level to another. The VE-2WP-EX is a type of DC-DC converter designed to convert a 12-volt DC input voltage to a higher-voltage output. The device is designed specifically for use in mobile applications, where electrical loads are powered by battery, solar, or other portable power sources.
Application Fields
The VE-2WP-EX can be used in a variety of portable device applications, such as consumer electronics, automotive, industrial, and medical products. It is especially well-suited for applications where the input voltage may vary, as it can maintain a stable output voltage regardless of input voltage fluctuations. It can also be used in applications where a high efficiency is required.
Working Principle
The VE-2WP-EX operates using the buck converter topology. It takes a DC voltage from a battery, solar panel, or other source and converts it into a higher-voltage regulated DC output. The device features an isolated return path, which enables it to isolate the input and output circuits from each other. This enables the device to maintain a clean, stable power output regardless of fluctuations in the input voltage. A heat sink is required to maintain optimal operating temperatures.
The VE-2WP-EX features a wide input voltage range of 9 to 18 volts DC, and can output up to 35 volts DC with up to 2500mA of output current. The device has a high efficiency up to 95 percent, which reduces power losses and minimizes heat buildup. The device is designed to operate in a temperature range of -40 to +85°C, so it is suitable for use in harsh environments. Additionally, the device includes current and temperature protection for safety.
In summary, the VE-2WP-EX is a DC-DC converter designed for mobile applications that require reliable, high-efficiency power conversion. It operates using the buck converter topology and can take a DC voltage from 9 to 18 volts and output up to 35 volts with up to 2500mA of current. The device features a wide temperature range, current and temperature protection, and high efficiency to reduce power losses.
The specific data is subject to PDF, and the above content is for reference
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...