VE-2WW-EY-F2

Current - Output (Max):	9.09A
Size / Dimension:	4.60" L x 1.86" W x 1.05" H (116.8mm x 47.2mm x 26.7mm)
Package / Case:	Full Brick
Mounting Type:	Through Hole
Efficiency:	88%
Operating Temperature:	-10°C ~ 85°C
Features:	OCP, OTP, OVP, SCP
Applications:	ITE (Commercial)
Voltage - Isolation:	3kV
Power (Watts):	50W
Series:	VE-200™
Voltage - Output 3:	--
Voltage - Output 2:	--
Voltage - Output 1:	5.5V
Voltage - Input (Max):	36V
Voltage - Input (Min):	18V
Number of Outputs:	1
Type:	Isolated Module
Part Status:	Active
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

DC-DC converters are electronic devices that convert electrical energy from one voltage level to another. The VE-2WW-EY-F2 is one such example. Generally, it is used to power devices that require an input voltage range that is different from the main voltage supply.The VE-2WW-EY-F2 is a non-isolated DC-DC converter that is part of a series of components produced by Volgen company. It is designed to reduce the input voltage from a range of 8 to 55 Volts (V) to a steady output voltage of either 5V or 3.3V. It can deliver a maximum of 2 Watts (W) of power and operates at frequencies of up to 600kHz.The VE-2WW-EY-F2 is an ideal choice for a wide range of applications, including the powering of low power electronics, such as Arduino boards and Raspberry Pis, power supplies for embedded systems, as well as the charging of portable device batteries. Its features make it a great choice for designing projects that require power input protection, and most importantly, it allows for an accurate and efficient voltage conversion.A VE-2WW-EY-F2 converter will typically comprise of two components; the Input stage and the output stage. The input stage consists of an active converter that reduces the AC input voltage to a much lower DC voltage. The voltage is then converted to the desired level with the help of a switching converter. This converter will contain one or more MOSFETS that are responsible for switching the current on and off.The output stage of the charging converter is responsible for producing the final output voltage. This stage contains a rectifier, a capacitor and a filter in order to smoothen out the output current. It also contains other components such as an inductor and a noise suppressor.The operating principle of a VE-2WW-EY-F2 converter is based on the concept of pulse width modulation (PWM). The PWM signal is used to switch the power devices attached to the converter on and off, producing a current that is proportional to the duration of the pulse width. The amount of power the converter supplies to the connected load is then determined by how often and how long each pulse is. The performance of a VE-2WW-EY-F2 converter can be increased by increasing its frequency and duty cycle. Furthermore, the output voltage can be adjusted by changing the ratio of the MOSFETS or by regulating the switching frequency.In terms of efficiency, the VE-2WW-EY-F2 converter usually works best with a high switching frequency and moderate duty cycle. These two features provide for an efficient and reliable power output. In conclusion, the VE-2WW-EY-F2 is a great example of a non-isolated DC-DC converter that provides an incredibly effective method of voltage conversion. Its efficiency is great even when used in applications that demand higher power inputs and outputs and its operation is based on the concept of pulse width modulation (PWM). As such, the VE-2WW-EY-F2 is a highly reliable and versatile component that can be used for a wide range of applications.

The specific data is subject to PDF, and the above content is for reference