VE-2WY-MW-F2

Current - Output (Max):	20A
Size / Dimension:	4.60" L x 1.86" W x 1.05" H (116.8mm x 47.2mm x 26.7mm)
Package / Case:	Full Brick
Mounting Type:	Through Hole
Efficiency:	90%
Operating Temperature:	-55°C ~ 85°C
Features:	OCP, OTP, OVP, SCP
Applications:	ITE (Commercial)
Voltage - Isolation:	3kV
Power (Watts):	66W
Series:	VE-200™
Voltage - Output 3:	--
Voltage - Output 2:	--
Voltage - Output 1:	3.3V
Voltage - Input (Max):	36V
Voltage - Input (Min):	18V
Number of Outputs:	1
Type:	Isolated Module
Part Status:	Active
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

DC DC Converters are a type of electronic device used to convert a DC input power into an AC or DC output power of a different or same magnitude. DC to DC converters are used in a variety of applications, such as in solar and wind power systems, electric vehicles, and electronic equipment.The most common type of DC DC converter is the VE-2WY-MW-F2 converter. This type of converter consists of four main parts: a step-down transformer, rectifier, filter, and controlled output rectification. It converts a DC input voltage to a lower DC output, and operates with a constant voltage and current.A step-down transformer is used to change the input voltage form to a lower AC voltage. It is also used to remove the harmonics generated by the input voltage which improves the reliability of the converter. Then, a rectifier is used to convert the rectified AC to DC. The DC output is then filtered and finally a controlled output rectifier is used to control the output voltage.The VE-2WY-MW-F2 converter has many advantages. It is small in size and can handle high power, up to 800 watts. It is very reliable and efficient, and has very low noise generation. It can also be used with a wide input voltage range – from 10 to 400 volts.The VE-2WY-MW-F2 converter is used in a variety of applications such as in solar and wind power systems, electric vehicles, electronic equipment, and battery charging systems. It is also used in renewable energy storage systems to convert direct current from solar or wind power into alternating current for use in homes or businesses.The primary use of the VE-2WY-MW-F2 converter is to convert power from a DC source, such as a battery, into an AC output for use in a variety of applications. It is used in home solar and wind power systems, battery charging systems, and motor controls. The VE-2WY-MW-F2 converter is an efficient and reliable way to convert DC to AC power.The VE-2WY-MW-F2 converter is a reliable and efficient device that can be used for a variety of applications. It is small in size and can handle high power, up to 800 watts. It has low noise output and can be used with a wide range of input voltages from 10 to 400 volts. It is used primarily to convert DC power into AC power and is used in solar and wind power systems, electric vehicles, electronic equipment, and battery charging systems.

The specific data is subject to PDF, and the above content is for reference